Dewalt 12 Compound Miter Saw DW705 Manual

The Dewalt 12 Compound Miter Saw DW705 is designed for precision and versatility in cutting various materials. It features a powerful motor, adjustable miter angles, and a robust design suitable for both professional and DIY projects. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Saw 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 12-inch blade, adjustable miter and bevel angles, laser guide, dust collection system, and ergonomic handle.

Feature	Description
12-inch Blade	For making precise crosscuts and miters in a variety of materials.
Adjustable Miter Angles	Allows for cuts from 0 to 50 degrees to the left and right.
Laser Guide	Helps ensure accurate cuts by projecting a line on the workpiece.
Dust Collection System	Minimizes debris and keeps the workspace clean.
Ergonomic Handle	Provides comfort and control during operation.

Installation

Unpack and inspect contents. Place the saw on a stable work surface.

Ensure the work area is clean and well-lit.
Secure the saw to a workbench or stand for stability.
Connect the dust collection bag if applicable.
Plug into a power source.

WARNING! Always ensure the saw is unplugged when making adjustments or changing blades.

First-Time Setup

Power on the saw; follow the setup instructions in the manual.

Adjust the miter and bevel settings as needed.
Install the blade according to the instructions.
Test the laser alignment before making cuts.

CAUTION! Always wear appropriate safety gear when operating the saw.

Specifications

Blade Size: 12 inches.
Motor Power: 15 amps.
Bevel Capacity: 0 to 48 degrees.
Miter Capacity: 0 to 50 degrees left and right.
Weight: 45 lbs.
Dust Collection: Yes, with dust bag.
Laser Guide: Yes.

Controls and Settings

Access the miter and bevel controls located on the front of the saw. The laser guide can be activated via a switch on the handle.

Safety Features: Blade guard, electric brake, and safety switch.

Connecting Devices

Ensure the saw is unplugged before making any connections.

Connect the dust collection system if available.
Ensure the power cord is in good condition and plugged into a suitable outlet.

Tip: Use a surge protector to safeguard against power surges.

Operating the Saw

Follow the instructions for making cuts safely and accurately.

Adjust the miter and bevel settings as needed.
Position the material securely against the fence.
Power on the saw and make the cut.

WARNING! Keep hands away from the blade while operating.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the saw after each use.
Check and replace the blade as necessary.
Inspect the power cord for damage.

CAUTION! Always unplug the saw before performing maintenance.

Safety Information

Read all safety instructions before operating the saw. Always wear safety glasses and hearing protection.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Saw won't start	Power source issue	Check power cord and outlet.
Blade not spinning	Blade lock engaged	Release the blade lock.
Inaccurate cuts	Misalignment	Check and adjust miter and bevel settings.
Excessive vibration	Worn blade	Replace the blade.

Service: Contact Dewalt customer service for further assistance.