Dewalt 13 Inch 735 Planer Manual

The Dewalt 13 Inch 735 Planer is a powerful tool designed for professional woodworkers and DIY enthusiasts. It features a 15-amp motor, two-speed gear box, and a 13-inch width capacity, making it ideal for planing a variety of materials. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Planer 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 15-amp motor, two-speed gearbox, adjustable depth control, and dust port for efficient chip removal.

Feature	Description
15-Amp Motor	Powerful motor for smooth and efficient planing.
Two-Speed Gearbox	Allows for different cutting speeds for various materials.
Adjustable Depth Control	Precise depth adjustments for accurate planing.
Dust Port	Connects to dust collection systems for a cleaner workspace.
Planer Blades	High-quality blades for a smooth finish.

Installation

Unpack and inspect the planer. Place it on a stable work surface.

Ensure the area is clean and free of debris.
Connect the dust port to a compatible dust collection system.
Plug the planer into a grounded outlet.

WARNING! Ensure all safety precautions are followed during installation.

First-Time Setup

Power on the planer and adjust the depth settings as needed.

Set the desired cutting depth using the depth adjustment knob.
Test the planer on a scrap piece of wood to ensure proper operation.

CAUTION! Always wear safety goggles and ear protection when operating the planer.

Specifications

Motor Power: 15 amps.
Planing Width: 13 inches.
Planing Depth: Up to 1/8 inch per pass.
Weight: 60 lbs.
Speed: 27,000 cuts per minute.
Dust Port Diameter: 2-1/2 inches.

Controls and Settings

Access the depth adjustment knob and speed selector on the front panel. Ensure the power switch is easily accessible.

Connecting Devices

Ensure the planer is connected to a compatible dust collection system for optimal performance.

Turn off the planer before connecting any devices.
Match the dust port to the appropriate collection system.

Tip: Regularly check and clean the dust port to maintain efficiency.

Operating the Planer

Follow these steps for effective planing.

Power on the planer and set the desired depth.
Feed the wood slowly into the planer for a smooth finish.
Monitor the operation and adjust as necessary.

WARNING! Keep hands clear of the cutting area at all times.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the planer after each use.
Inspect and replace blades as needed.
Check electrical connections periodically.

CAUTION! Always unplug the planer before performing maintenance.

Safety Information

Read all safety instructions before operating the planer. Always wear appropriate safety gear.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Planer won't start	No power	Check power source and connections.
Uneven cuts	Improper depth setting	Adjust depth and test on scrap wood.
Excessive noise	Worn blades	Inspect and replace blades if necessary.
Dust not collecting	Clogged dust port	Clear any obstructions in the dust port.

Reset: Refer to the manual for any reset procedures.

Service: Contact Dewalt customer service for assistance.