Dewalt 14 Chop Saw Model DW670 Manual

The Dewalt 14 Chop Saw Model DW670 is a powerful and versatile cutting tool designed for both professional and DIY use. It features a robust motor, a durable blade, and a variety of safety features to ensure optimal performance and user safety. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Saw 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 14-inch blade, powerful motor, adjustable cutting angles, safety guard, and sturdy base.

Feature	Description
14-inch Blade	Designed for cutting various materials with precision.
Powerful Motor	Delivers high performance for tough cutting tasks.
Adjustable Cutting Angles	Allows for versatile cuts at different angles.
Safety Guard	Protects user from debris during operation.
Sturdy Base	Provides stability during cutting operations.

Installation

Unpack and inspect contents. Place the saw on a stable surface.

Ensure the work area is clean and well-lit.
Attach the blade securely following the manufacturer's instructions.
Plug into a suitable power outlet.

WARNING! Ensure all safety precautions are followed during installation.

First-Time Setup

Power on the saw; ensure all settings are configured correctly.

Check blade alignment and adjust if necessary.
Set the desired cutting angle using the adjustment lever.
Test the saw with a scrap piece of material before actual use.

CAUTION! Always wear appropriate safety gear during setup.

Specifications

Blade Size: 14 inches.
Motor Power: 15 Amp.
Cutting Capacity: Up to 4 inches thick.
Weight: 45 lbs.
Dimensions: 24 x 20 x 15 inches.
Power Source: 120V AC.

Controls and Settings

Access the main controls located on the front panel of the saw. Key controls include the power switch, angle adjustment lever, and safety lock.

Connecting Devices

This saw does not require external devices for operation. Ensure it is connected to a suitable power source.

Operating the Saw

Follow these steps to operate the saw safely and effectively.

Ensure the area is clear of obstacles.
Position the material securely on the base.
Power on the saw and make the cut.
Turn off the saw after completing the cut.

WARNING! Always keep hands away from the blade during operation.

Safety Features

The saw is equipped with several safety features, including a safety guard, a blade brake, and a safety lock to prevent accidental start-up.

Care & Cleaning

Unplug the saw before cleaning. Use a dry cloth to wipe down the exterior; avoid using liquids.

CAUTION! Do not use abrasive cleaners; they may damage the surface.

Regulatory Information

This product complies with all applicable safety standards and regulations. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Saw does not start	No power	Check power source and connections.
Blade not cutting	Dull blade	Replace or sharpen the blade.
Excessive vibration	Improper mounting	Ensure the saw is securely mounted.
Smoke or burning smell	Overheating	Turn off the saw and allow it to cool.

Reset: If issues persist, consult the manual or contact support.

Service: 1-800-433-9258; www.dewalt.com