Dewalt 1400 Jump Box Manual

The Dewalt 1400 Jump Box is a portable power source designed for jump-starting vehicles and providing power for various electronic devices. It features a powerful battery, multiple charging ports, and safety features to ensure reliable performance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating Instructions 8. Safety Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-capacity battery, USB charging ports, LED work light, heavy-duty clamps, and built-in safety features.

Feature	Description
High-capacity battery	Provides reliable power for jump-starting vehicles
USB charging ports	For charging mobile devices and electronics
LED work light	Illuminates dark areas for better visibility
Heavy-duty clamps	Ensures secure connection to vehicle battery
Safety features	Overload protection and reverse polarity alarm

Installation

Unpack and inspect contents. Ensure the jump box is fully charged before use.

Connect the clamps: Attach the red clamp to the positive terminal and the black clamp to the negative terminal.
Ensure the jump box is turned on before attempting to start the vehicle.
Follow the vehicle's manual for specific jump-starting instructions.

WARNING! Always wear safety goggles and gloves when using the jump box.

First-Time Setup

Charge the jump box fully before first use; follow the included instructions for charging.

Plug the jump box into a standard outlet using the provided charger.
Allow the jump box to charge until the indicator light shows full charge.
Test the jump box by attempting to start a vehicle.

CAUTION! Do not attempt to jump-start a vehicle with a damaged battery.

Specifications

Battery Capacity: 1400 peak amps.
Output Voltage: 12V DC.
USB Ports: 2 x 2.1A.
Weight: 18 lbs.
Dimensions: 12 x 10 x 8 inches.
Charging Time: Approximately 4-5 hours.
Operating Temperature: 0°C to 40°C.

Controls and Settings

Power button, USB charging ports, LED indicator lights for charge status, and jump-starting controls.

LED Indicators: Show battery status and charging status.

Connecting Devices

Connect the jump box to the vehicle's battery using the heavy-duty clamps.

Ensure the jump box is off before connecting clamps.
Connect the red clamp to the positive terminal and the black clamp to the negative terminal.
Turn on the jump box and attempt to start the vehicle.

Tip: Always check the vehicle's manual for specific jump-starting instructions.

Operating Instructions

To use the jump box, follow the steps outlined in the installation section. Ensure all connections are secure before attempting to start the vehicle.

Safety Features

The Dewalt 1400 Jump Box includes safety features such as overload protection and reverse polarity alarm to prevent damage and ensure safe operation.

Care & Maintenance

Store the jump box in a cool, dry place. Regularly check the battery status and charge as needed.

CAUTION! Do not expose the jump box to extreme temperatures or moisture.

Regulatory Information

This product complies with all applicable regulations and standards for safety and performance. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Jump box does not charge	Faulty charger	Check charger connections and replace if necessary.
No power output	Battery depleted	Recharge the jump box fully before use.
Clamps not connecting	Corroded terminals	Clean battery terminals and ensure secure connection.
LED indicators not working	Internal failure	Contact customer service for assistance.

Reset: Disconnect and reconnect the battery if available.

Service: 1-800-433-9258; www.dewalt.com