Dewalt 18V Lithium Ion Battery Charger Manual

The Dewalt 18V Lithium Ion Battery Charger is designed to charge Dewalt 18V lithium-ion batteries efficiently and safely. This charger features a compact design, LED indicators for charging status, and built-in safety features to prevent overcharging and overheating. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Charging Procedure 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Compact design, LED charging indicators, built-in safety features, compatible with Dewalt 18V lithium-ion batteries.

Feature	Description
LED Indicators	Displays charging status (charging, charged, error)
Compact Design	Easy to store and transport
Overcharge Protection	Prevents battery damage from overcharging
Overheat Protection	Automatically shuts off when overheating
Compatibility	Works with all Dewalt 18V lithium-ion batteries

Installation

Unpack and inspect the charger. Place it on a stable surface near a power outlet.

Connect the charger to a power outlet using the provided power cord.
Ensure the charger is placed in a well-ventilated area.
Check that the power indicator light is on.

WARNING! Do not expose the charger to moisture or extreme temperatures.

First-Time Setup

Before using the charger for the first time, ensure it is properly connected to a power source.

Insert the battery into the charger, ensuring proper alignment.
Observe the LED indicator for charging status.
Allow the battery to charge fully before first use.

CAUTION! Do not attempt to charge non-Dewalt batteries.

Specifications

Input Voltage: 120V AC.
Output Voltage: 18V DC.
Charging Time: Approximately 1 hour for a standard battery.
Weight: 1.5 lbs.
Dimensions: 8 x 5 x 3 inches.
Compatibility: Dewalt 18V lithium-ion batteries.
Safety Features: Overcharge and overheat protection.

Controls and Settings

The charger features a simple interface with LED indicators to show the charging status. No additional settings are required for operation.

Connecting Devices

To charge a battery, simply insert it into the charger until it clicks into place.

Ensure the charger is unplugged before inserting or removing the battery.
Align the battery with the charger contacts.
Plug the charger into a power outlet.

Tip: Always check the battery for damage before charging.

Charging Procedure

Follow these steps to charge your Dewalt 18V lithium-ion battery:

Insert the battery into the charger.
Plug the charger into a power outlet.
Monitor the LED indicator for charging status.
Once fully charged, remove the battery from the charger.

WARNING! Do not leave the battery in the charger for extended periods after it is fully charged.

Safety Features

The charger is equipped with several safety features to ensure safe operation:

Overcharge protection to prevent battery damage.
Overheat protection that automatically shuts off the charger.
LED indicators to inform the user of the charging status.

Care & Cleaning

Unplug the charger before cleaning. Use a dry cloth to wipe down the exterior; do not use liquids or aerosols.

CAUTION! Keep the charger away from moisture and extreme temperatures.

Regulatory Information

This charger complies with FCC regulations and is designed for residential use. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Charger does not power on	No power supply	Check power outlet and connections.
Battery not charging	Improper connection	Ensure battery is seated correctly in the charger.
LED indicator not lit	Faulty charger	Contact customer service for assistance.
Battery overheats	Overcharging	Remove battery and allow it to cool before recharging.

Reset: Unplug the charger for a few minutes to reset.

Service: For service inquiries, contact Dewalt customer support.