Dewalt 20 Volt Charger Manual

The Dewalt 20 Volt Charger is designed to quickly charge Dewalt 20V MAX lithium-ion batteries. It features a compact design, LED indicators for charging status, and compatibility with various battery types. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Charging Batteries 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Compact design, LED charging indicators, compatibility with 20V MAX batteries, and built-in safety features.

Feature	Description
LED Indicators	Shows charging status (charging, charged, fault)
Compact Design	Easy to store and transport
Fast Charging	Charges batteries quickly to minimize downtime
Compatibility	Works with all Dewalt 20V MAX lithium-ion batteries
Safety Features	Overload protection and temperature control

Installation

Unpack the charger and inspect for any damage. Place the charger on a stable surface near a power outlet.

Connect the charger to a power outlet using the provided power cord.
Ensure the charger is placed in a well-ventilated area.
Do not cover the charger while in use.

WARNING! Ensure the charger is unplugged when not in use to avoid hazards.

First-Time Setup

Power on the charger; ensure it is connected to a power source.

Insert the battery into the charger until it clicks into place.
Check the LED indicator to confirm charging has started.
Remove the battery once fully charged.

CAUTION! Do not attempt to charge non-Dewalt batteries.

Specifications

Input Voltage: 120V AC, 60Hz.
Output Voltage: 20V DC.
Charging Time: Approximately 60 minutes for a 2.0Ah battery.
Weight: 1.5 lbs.
Dimensions: 8 x 5 x 4 inches.
Compatibility: Dewalt 20V MAX lithium-ion batteries.
Safety Features: Overload protection, short circuit protection.

Controls and Settings

Access charging status via LED indicators. The charger has no complex settings; simply insert the battery to start charging.

LED Indicators: Green for fully charged, Red for charging, Flashing Red for fault.

Connecting Devices

Ensure the charger is unplugged before connecting or disconnecting batteries.

Align the battery with the charger slot.
Press down until the battery clicks into place.
To remove, press the release button and pull the battery out.

Tip: Always check the battery for damage before charging.

Charging Batteries

Supports Dewalt 20V MAX lithium-ion batteries.

Insert battery: Ensure it is properly seated in the charger.
Monitor LED: Check for charging status via LED indicators.
Remove battery: Once charged, press the release button to remove.

WARNING! Do not leave batteries unattended while charging.

Safety Features

The charger includes several safety features to protect both the charger and the battery.

Overload protection to prevent overheating.
Short circuit protection to prevent damage.
LED indicators to inform users of charging status.

Care & Cleaning

Unplug the charger before cleaning. Use a dry cloth to wipe the surface; do not use liquids or aerosols.

CAUTION! Avoid exposing the charger to moisture or extreme temperatures.

Regulatory Information

Meets FCC Part 15 requirements for Class B digital devices. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Charger not working	No power	Check power outlet and connections.
Battery not charging	Faulty battery	Replace battery if damaged.
LED indicator not lit	Charger malfunction	Contact customer service for assistance.
Battery overheating	Overload	Unplug charger and allow to cool.

Reset: Unplug the charger for 10 seconds to reset.

Service: Contact Dewalt customer service for further assistance.