Dewalt 20V Charger Manual

The Dewalt 20V Charger is designed to charge Dewalt 20V lithium-ion batteries efficiently. It features a compact design, LED indicators for charging status, and compatibility with various Dewalt battery models. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Charging Batteries 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Compact design, LED charging indicators, compatibility with Dewalt 20V batteries.

Feature	Description
LED Indicators	Displays charging status (charging, charged, error)
Compact Design	Easy to store and transport
Compatibility	Works with all Dewalt 20V lithium-ion batteries
Fast Charging	Charges batteries quickly to minimize downtime

Installation

Unpack the charger and inspect for any damage. Place the charger on a stable surface away from moisture.

Connect the charger to a power outlet using the provided power cord.
Ensure the outlet is functioning properly.
Place the battery onto the charger, aligning the contacts.

WARNING! Do not expose the charger to water or extreme temperatures.

First-Time Setup

Power on the charger by plugging it into an outlet. Follow the LED indicators for charging status.

Insert the battery into the charger.
Observe the LED indicator for charging status.
Remove the battery once fully charged.

CAUTION! Ensure the charger is unplugged when not in use.

Specifications

Input Voltage: 120V AC.
Output Voltage: 20V DC.
Charging Time: Approximately 60 minutes for a standard battery.
Compatibility: Dewalt 20V lithium-ion batteries.
Weight: 1.5 lbs.
Dimensions: 8 x 6 x 4 inches.

Controls and Settings

The charger features a simple interface with LED indicators to show the charging status. No additional settings are required.

Connecting Devices

Ensure the charger is unplugged before connecting or disconnecting batteries.

Align the battery with the charger contacts.
Press down gently until the battery clicks into place.
Plug the charger into a power outlet.

Tip: Always check the battery for damage before charging.

Charging Batteries

To charge a Dewalt 20V battery, follow these steps:

Insert the battery into the charger.
Check the LED indicator for charging status.
Once charged, remove the battery from the charger.

WARNING! Do not leave the battery on the charger for extended periods after it is fully charged.

Accessibility Features

The charger is designed for ease of use, with clear LED indicators for charging status, making it accessible for all users.

Care & Cleaning

Unplug the charger before cleaning. Use a dry cloth to wipe the exterior; do not use liquids or aerosols.

CAUTION! Keep the charger away from moisture and extreme temperatures.

Regulatory Information

This charger complies with all applicable safety standards. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Charger not working	No power	Check power outlet and connections.
LED not lit	Battery not seated properly	Remove and reinsert the battery.
Battery not charging	Faulty battery	Test with another battery.
Overheating	Blocked ventilation	Ensure charger is in a well-ventilated area.

Reset: Unplug the charger for 10 seconds to reset.

Service: Contact Dewalt customer service for assistance.