Dewalt 705 Compound Miter Saw Manual

The Dewalt 705 Compound Miter Saw is a powerful tool designed for precision cutting of wood and other materials. It features a 12-inch blade, adjustable miter angles, and a robust motor that provides the necessary power for various cutting tasks. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Saw 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 12-inch blade, adjustable miter angles, laser guide, dust collection port, and ergonomic handle.

Feature	Description
12-inch Blade	Provides a wide cutting capacity for various materials.
Adjustable Miter Angles	Allows for precise angle cuts up to 50 degrees.
Laser Guide	Helps ensure accurate cuts by projecting a line on the workpiece.
Dust Collection Port	Connects to a vacuum for cleaner workspace.
Ergonomic Handle	Designed for comfort and reduced fatigue during use.

Installation

Unpack and inspect the saw. Place it on a stable work surface.

Attach the saw to a workbench or stand for stability.
Ensure the power cord is in good condition and plug into a suitable outlet.
Adjust the miter and bevel settings as needed.

WARNING! Ensure the saw is securely mounted to avoid accidents.

First-Time Setup

Power on the saw and familiarize yourself with the controls.

Set the blade height and angle according to your cutting needs.
Test the laser guide alignment before making cuts.
Practice making cuts on scrap material to ensure accuracy.

CAUTION! Always wear safety goggles and hearing protection.

Specifications

Blade Size: 12 inches.
Motor Power: 15 Amp.
Miter Angle Range: 0 to 50 degrees.
Bevel Angle Range: 0 to 45 degrees.
Weight: 50 lbs.
Dust Collection: Yes, with port.
Laser Guide: Yes, included.

Controls and Settings

Access the miter and bevel controls located on the front of the saw. The power switch is easily accessible for quick operation.

Adjustments: Use the knobs to set the desired angles for miter and bevel cuts.

Connecting Devices

Ensure the saw is unplugged before making any adjustments or connecting accessories.

Connect a vacuum to the dust collection port for cleaner operation.
Use appropriate extension cords if needed, ensuring they are rated for the saw's power requirements.

Tip: Always check connections before powering on the saw.

Operating the Saw

Follow these steps for safe and effective operation:

Adjust the blade height and angle as needed.
Secure the workpiece against the fence.
Power on the saw and make the cut, keeping hands clear of the blade.

WARNING! Never reach over the blade while it is in motion.

Maintenance

Regular maintenance is essential for optimal performance.

Keep the blade clean and sharp.
Check and tighten all screws and bolts periodically.
Inspect the power cord for any damage.

CAUTION! Unplug the saw before performing maintenance.

Safety Information

Always follow safety guidelines when operating the saw.

Wear appropriate personal protective equipment (PPE).
Keep the work area clean and well-lit.
Do not operate the saw if you are tired or under the influence of drugs/alcohol.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Blade not spinning	Power issue	Check power connection and switch.
Inaccurate cuts	Misalignment	Check and adjust miter and bevel settings.
Excessive vibration	Loose parts	Tighten all screws and bolts.
Laser not working	Battery issue	Replace the battery in the laser guide.

Service: For further assistance, contact Dewalt customer service.