Dewalt 720 Radial Arm Saw Manual

The Dewalt 720 Radial Arm Saw is a versatile tool designed for precision cutting, featuring a powerful motor, adjustable arm, and various cutting capabilities including crosscuts, rip cuts, and bevel cuts. This manual provides essential information on safety, features, setup, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Saw 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Adjustable arm, powerful motor, safety guard, and various cutting settings.

Feature	Description
Adjustable Arm	Allows for precise angle cuts and adjustments.
Powerful Motor	Provides the necessary power for heavy-duty cutting tasks.
Safety Guard	Protects the user from accidental contact with the blade.
Cutting Settings	Multiple settings for crosscuts, rip cuts, and bevel cuts.

Installation

Unpack and inspect the saw. Ensure a stable and level surface for operation.

Attach the saw to a sturdy workbench or stand.
Connect to a power source following the manufacturer's guidelines.
Ensure all safety features are in place before use.

WARNING! Ensure the saw is securely mounted to avoid accidents.

First-Time Setup

Power on the saw; follow the initial setup instructions.

Adjust the arm to the desired position for cutting.
Set the blade height according to the material being cut.
Test the saw with a scrap piece of wood to ensure proper operation.

CAUTION! Always wear safety gear when operating the saw.

Specifications

Motor Power: 1.5 HP.
Blade Size: 10 inches.
Cutting Capacity: Up to 12 inches wide.
Weight: 75 lbs.
Dimensions: 30 x 20 x 15 inches.
Power Source: 120V AC.
Operating Temperature: Standard room temperature.

Controls and Settings

Access the main controls on the front panel: Power switch, blade height adjustment, and arm angle adjustment.

Safety Features: Emergency stop button, blade guard, and anti-kickback pawls.

Connecting Power

Ensure the saw is unplugged before making any connections.

Connect the power cord to a grounded outlet.
Check the voltage rating to ensure compatibility.
Inspect the cord for any damage before use.

Tip: Use a surge protector for added safety.

Operating the Saw

Follow these steps for safe operation:

Power on the saw and allow the blade to reach full speed.
Feed the material slowly into the blade for a clean cut.
Always keep hands clear of the cutting area.

WARNING! Never reach over the blade while it is in motion.

Safety Features

Includes a blade guard, emergency stop button, and anti-kickback pawls to enhance user safety.

Care & Cleaning

Unplug the saw before cleaning. Use a dry cloth to wipe down the exterior; avoid using liquids.

CAUTION! Ensure the saw is cool before cleaning.

Regulatory Information

Complies with safety standards for power tools. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Saw won't start	Power connection	Check power cord and outlet.
Blade not cutting	Dull blade	Replace or sharpen the blade.
Excessive vibration	Improper mounting	Ensure saw is securely mounted.
Noise during operation	Loose parts	Tighten all screws and bolts.

Reset: Follow the manufacturer's instructions for resetting the saw if necessary.

Service: Contact Dewalt customer service for further assistance.