Dewalt 733 Planer Owners Manual

The Dewalt 733 Planer is a powerful and versatile tool designed for professional woodworkers and DIY enthusiasts. This 12-inch portable planer features a robust motor, precision cutting blades, and a compact design, making it ideal for planing wood to a smooth finish. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Planer 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 12-inch cutting width, powerful motor, adjustable depth settings, and a dust port for efficient cleanup.

Feature	Description
12-inch cutting width	Allows for planing larger boards with ease.
Powerful motor	Delivers consistent performance for smooth finishes.
Adjustable depth settings	Enables precise control over material removal.
Dust port	Connects to vacuum systems for cleaner workspaces.
Portable design	Easy to transport and store.

Installation

Unpack and inspect the planer. Ensure all components are included.

Place the planer on a stable surface.
Connect the dust port to a vacuum system if desired.
Plug the planer into a suitable power outlet.

WARNING! Ensure the planer is unplugged during setup to avoid accidental start-up.

First-Time Setup

Power on the planer and adjust the depth settings according to your material.

Set the desired depth of cut using the adjustment knob.
Ensure the material is securely positioned against the planer.
Turn on the planer and feed the material through slowly.

CAUTION! Always wear safety goggles and ear protection while operating the planer.

Specifications

Planer Type: Portable, electric.
Cutting Width: 12 inches.
Motor Power: 15 amps.
Depth of Cut: Adjustable up to 1/8 inch.
Weight: 60 lbs.
Dust Port Diameter: 2.5 inches.
Power Source: 120V AC.

Controls and Settings

Access the depth adjustment knob and power switch located on the front panel. Ensure the planer is set to the desired depth before operation.

Tip: Familiarize yourself with the controls before starting to ensure safe operation.

Connecting Devices

Connect the dust port to a vacuum system for optimal dust collection.

Ensure the planer is turned off and unplugged.
Attach the dust port to the vacuum hose.
Plug the planer into a power outlet.

Tip: Regularly check and clean the dust port to maintain efficiency.

Operating the Planer

Follow these steps to operate the planer effectively.

Power on the planer.
Feed the material slowly and steadily through the planer.
Adjust the depth as needed for desired results.
Turn off the planer after use and unplug it.

WARNING! Do not place hands near the cutting area while the planer is in operation.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the blades and housing after each use.
Check and replace blades as necessary.
Inspect the power cord for damage.

CAUTION! Always unplug the planer before performing maintenance.

Safety Information

Always follow safety guidelines when operating the planer.

Wear safety goggles and ear protection.
Keep hands away from the cutting area.
Do not operate the planer in wet conditions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Planer does not start	Power supply issue	Check power cord and outlet.
Uneven cut	Blades dull or misaligned	Inspect and replace or adjust blades.
Excessive noise	Loose components	Tighten screws and check for loose parts.
Dust collection ineffective	Clogged dust port	Clear any blockages in the dust port.

Service: For further assistance, contact Dewalt customer support.