Dewalt 734 Manual

The Dewalt 734 is a powerful 15-amp, 2-speed planer designed for professional woodworkers. It features a 3-knife cutter head that provides a smooth finish and a maximum cutting depth of 1/8 inch. The planer is equipped with a dust port for efficient chip removal and a built-in kickstand for easy blade changes. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 15-amp motor, 3-knife cutter head, adjustable depth settings, dust port, built-in kickstand.

Feature	Description
15-amp motor	Powerful motor for efficient planing
3-knife cutter head	Provides a smooth finish and reduces tear-out
Adjustable depth settings	Allows for precise cutting depth adjustments
Dust port	Connects to vacuum for efficient chip removal
Built-in kickstand	Holds the planer off the work surface for blade changes

Installation

Unpack and inspect contents. Ensure all components are included.

1. Place the planer on a stable surface.
2. Connect the dust port to a vacuum for optimal performance.
3. Adjust the depth settings according to your project needs.
4. Plug into a suitable power outlet.

WARNING! Always ensure the planer is unplugged when making adjustments or changing blades.

First-Time Setup

Power on the planer; familiarize yourself with the controls.

1. Set the desired cutting depth using the depth adjustment knob.
2. Ensure the dust port is connected to a vacuum.
3. Test the planer on a scrap piece of wood to adjust settings.

CAUTION! Always wear safety goggles and ear protection when operating the planer.

Specifications

• Motor: 15-amp, 120V.
• Cutter Head: 3-knife system.
• Maximum Cutting Depth: 1/8 inch.
• Weight: 32 lbs.
• Dust Port: 2-1/2 inch diameter.
• Speed: 20,000 RPM.
• Planing Width: 12 inches.

Controls and Settings

Access depth settings via the adjustment knob. The power switch is located on the front panel for easy access.

Tip: Always start with a shallow cut to avoid overloading the motor.

Connecting Devices

Ensure the dust port is connected to a vacuum for optimal performance.

1. Turn off the planer before connecting the dust port.
2. Match the dust port to the vacuum hose.

Tip: Regularly check the dust collection system for blockages.

Operating the Planer

Follow these steps to operate the planer effectively.

1. Power on the planer.
2. Adjust the depth settings as needed.
3. Feed the wood slowly into the planer.
4. Monitor the output for a smooth finish.

WARNING! Do not force the wood through the planer; let the tool do the work.

Maintenance

Regular maintenance is essential for optimal performance.

1. Clean the dust port and blades after each use.
2. Check for any loose screws or parts.
3. Lubricate moving parts as needed.

CAUTION! Always unplug the planer before performing maintenance.

Safety Information

Always follow safety guidelines when operating the planer.

• Wear safety goggles and ear protection.
• Keep hands away from the cutting area.
• Do not operate in wet conditions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Planer not starting	Power supply issue	Check power cord and outlet.
Uneven cuts	Improper depth setting	Adjust depth settings accordingly.
Excessive noise	Worn blades	Inspect and replace blades if necessary.
Dust not collecting	Blocked dust port	Clear any blockages in the dust collection system.

Service: For further assistance, contact Dewalt customer service.