Dewalt 734 Planer Repair Manual

The Dewalt 734 Planer is a powerful tool designed for woodworking enthusiasts and professionals. This manual provides essential information for the maintenance, repair, and troubleshooting of the Dewalt 734 Planer. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Planer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: 15-amp motor, 3 knife cutter head, adjustable depth control, and a built-in dust port.

Feature	Description
15-Amp Motor	Powerful motor for efficient planing of hardwoods.
3 Knife Cutter Head	Provides a smooth finish and reduces snipe.
Adjustable Depth Control	Allows for precise depth adjustments up to 1/8 inch.
Built-in Dust Port	Connects to a vacuum for efficient dust collection.

Installation

Unpack and inspect the planer. Place it on a stable work surface.

Ensure the planer is unplugged before installation.
Attach the dust port to a vacuum for optimal dust collection.
Set the planer on a flat surface to ensure stability during operation.

WARNING! Always use safety goggles and ear protection when operating the planer.

First-Time Setup

Power on the planer and adjust the depth settings according to your project needs.

Plug in the planer and ensure it is securely positioned.
Adjust the depth control to the desired thickness.
Run a test piece of wood to ensure proper operation.

CAUTION! Keep hands clear of the cutter head while operating.

Specifications

Motor Power: 15 amps.
Cutter Head Speed: 20,000 RPM.
Planing Width: 12 inches.
Planing Depth: Up to 1/8 inch.
Weight: 60 lbs.
Dust Port Diameter: 2-1/2 inches.

Controls and Settings

Access the depth adjustment knob and power switch located on the front panel.

Safety Features: Includes a safety lock to prevent accidental start-up.

Connecting Devices

Ensure the planer is connected to a suitable power source and the dust port is attached to a vacuum.

Turn off the planer before connecting to power.
Ensure all connections are secure before operation.

Tip: Use a dedicated circuit to avoid tripping breakers.

Operating the Planer

Follow these steps to operate the planer effectively.

Adjust the depth control to your desired thickness.
Feed the wood slowly into the planer for a smooth finish.
Monitor the dust collection to ensure optimal performance.

WARNING! Do not overload the planer with too thick material.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the dust port and cutter head regularly.
Check and replace blades as necessary.
Store the planer in a dry place when not in use.

CAUTION! Always unplug the planer before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Planer won't start	Power supply issue	Check power cord and outlet.
Uneven finish	Blades dull	Replace or sharpen blades.
Excessive noise	Loose parts	Tighten screws and check for loose components.
Dust not collecting	Clogged dust port	Clear any blockages in the dust port.

Reset: Ensure all settings are correct and restart the planer.