Dewalt 735 Manual

The Dewalt 735 is a powerful and versatile thickness planer designed for professional woodworkers and DIY enthusiasts. It features a 15-amp motor, a two-speed gearbox, and a 13-inch width capacity, making it ideal for a variety of woodworking projects. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 15-amp motor, two-speed gearbox, 13-inch width capacity, and a dust port for efficient chip removal.

Feature	Description
15-amp motor	Powerful motor for handling tough materials
Two-speed gearbox	Adjustable speed settings for different wood types
13-inch width capacity	Allows for larger workpieces
Dust port	Connects to vacuum for cleaner workspace
Adjustable depth	Precise depth adjustment for accurate cuts

Installation

Unpack and inspect contents. Place on a stable surface.

1. Ensure the work area is clean and free of debris.
2. Attach the dust port to a vacuum for optimal performance.
3. Plug into a grounded outlet.
4. Check all components for secure attachment.

WARNING! Ensure the planer is securely mounted to prevent movement during operation.

First-Time Setup

Power on the planer; follow the setup instructions.

1. Adjust the depth of cut using the depth adjustment knob.
2. Set the speed according to the material being used.
3. Run a test piece to ensure settings are correct.

CAUTION! Always wear safety goggles and ear protection during operation.

Specifications

• Motor Power: 15 amps.
• Planing Width: 13 inches.
• Planing Depth: Up to 1/8 inch per pass.
• Speed: 96 or 179 cuts per inch.
• Weight: 80 lbs.
• Dust Port Diameter: 2-1/2 inches.

Controls and Settings

Access settings via the control panel located on the front of the machine. Key controls include the power switch, depth adjustment knob, and speed selector.

Connecting Devices

Ensure all devices are compatible with the Dewalt 735. Use appropriate power cords and connectors.

1. Turn off all devices before connecting.
2. Match the power requirements of the devices.
3. Ensure all connections are secure.

Tip: Always refer to the manufacturer's guidelines for compatibility.

Operating the Planer

Follow these steps to operate the planer effectively.

1. Power on the machine.
2. Feed the wood slowly into the planer.
3. Monitor the depth and adjust as necessary.
4. Turn off the machine after use and clean the area.

WARNING! Keep hands clear of the cutting area at all times.

Maintenance and Care

Regular maintenance is essential for optimal performance.

• Clean the blades after each use.
• Check for loose screws and tighten as necessary.
• Store in a dry place when not in use.

Safety Information

Always follow safety guidelines to prevent accidents.

• Wear appropriate safety gear.
• Keep the workspace clear of hazards.
• Do not operate the planer without proper training.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Planer won't start	Power supply issue	Check power cord and outlet.
Uneven cuts	Improper depth setting	Adjust depth and re-test.
Excessive noise	Worn blades	Inspect and replace blades if necessary.
Wood jams	Incorrect feeding	Feed wood slowly and steadily.

Reset: Refer to the manual for reset procedures if available.

Service: Contact Dewalt customer service for assistance.