Dewalt 735 Planer Manual

The Dewalt 735 Planer is a powerful and versatile tool designed for professional woodworkers and DIY enthusiasts. It features a 15-amp motor that delivers a smooth finish on hardwoods and softwoods alike. With a maximum cutting depth of 1/8 inch and a feed rate of 82 feet per minute, this planer is perfect for achieving precise thickness and smooth surfaces. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Planer 8. Maintenance and Care 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 15-amp motor, dual blades, adjustable depth, and a built-in dust port.

Feature	Description
15-Amp Motor	Powerful motor for efficient cutting
Dual Blades	Provides a smooth finish and reduces snipe
Adjustable Depth	Allows for precise thickness adjustments
Built-in Dust Port	Connects to vacuum for easy dust collection
Lightweight Design	Easy to transport and maneuver

Installation

Unpack and inspect contents. Place the planer on a stable surface.

Ensure the planer is unplugged before installation.
Attach the dust collection system if desired.
Adjust the depth settings according to your project needs.
Plug into a suitable power outlet.

WARNING! Always use safety gear when operating the planer.

First-Time Setup

Power on the planer and follow the setup instructions in the manual.

Adjust the depth of cut using the depth adjustment knob.
Ensure the blades are sharp and properly installed.
Test the planer on a scrap piece of wood before starting your project.

CAUTION! Ensure all safety features are engaged before use.

Specifications

Motor Power: 15 Amps.
Max Cutting Depth: 1/8 inch.
Feed Rate: 82 feet per minute.
Weight: 80 lbs.
Blade Type: Dual reversible blades.
Dust Port Size: 2-1/2 inches.
Dimensions: 25 x 20 x 18 inches.

Controls and Settings

Access the depth adjustment knob and power switch located on the front panel.

Safety Features: Includes a safety lock and overload protection.

Connecting Devices

Connect the dust collection system to the built-in dust port for efficient cleanup.

Ensure the planer is turned off before connecting any devices.
Match the dust port to the vacuum hose for a secure fit.

Tip: Regularly check and clean the dust port to maintain performance.

Operating the Planer

Follow these steps to operate the planer effectively.

Power on the planer and adjust the depth of cut.
Feed the wood slowly into the planer for an even finish.
Monitor the output and adjust settings as necessary.

WARNING! Keep hands clear of the cutting area while operating.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Clean the blades after each use.
Check and replace worn parts as needed.
Store the planer in a dry place to prevent rust.

Safety Information

Always follow safety guidelines when using the planer.

Wear safety goggles and ear protection.
Keep the work area clean and well-lit.
Do not operate the planer without proper training.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Planer does not start	Power connection	Check power cord and outlet.
Uneven cut	Blades dull	Sharpen or replace blades.
Excessive noise	Loose parts	Tighten all screws and bolts.
Dust not collecting	Clogged dust port	Clear any blockages in the dust port.

Reset: Refer to the manual for reset instructions if available.

Service: Contact customer support for assistance.