Dewalt 735 Planer Manual PDF

The Dewalt 735 Planer is a powerful and versatile tool designed for woodworking enthusiasts and professionals alike. This 13-inch thickness planer features a two-speed gearbox, allowing users to choose between a faster feed rate for rough cuts and a slower feed rate for a finer finish. With its robust motor and precision cutting capabilities, the Dewalt 735 ensures smooth and accurate planing of various wood types. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Planer 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 13-inch cutting width, two-speed gearbox, adjustable depth control, and integrated dust port.

Feature	Description
Two-speed gearbox	Allows for fast or fine feed rates
Depth adjustment	Easy-to-use knob for precise depth settings
Dust port	Connects to vacuum for efficient dust collection
Robust motor	Powerful motor for handling tough materials
Portable design	Compact and lightweight for easy transport

Installation

Unpack and inspect contents. Place on a stable surface.

Ensure the work area is clean and well-lit.
Attach the dust port to a vacuum for optimal dust collection.
Plug the planer into a suitable power outlet.
Adjust the depth setting before use.

WARNING! Always wear safety goggles and ear protection while operating the planer.

First-Time Setup

Power on the planer and familiarize yourself with the controls.

Set the desired cutting depth using the adjustment knob.
Ensure the blades are sharp and properly installed.
Run a test piece of wood to check settings.

CAUTION! Keep hands away from the cutting area during operation.

Specifications

Planer Width: 13 inches.
Motor Power: 15 amps.
Feed Rate: 28 ft/min (high speed), 18 ft/min (low speed).
Depth Capacity: Up to 1/8 inch per pass.
Weight: 80 lbs.
Dust Port Diameter: 2-1/2 inches.

Controls and Settings

Access the depth adjustment knob and speed selector on the front panel. The power switch is located on the side for easy access.

Tip: Always check the depth setting before starting the planer.

Connecting Devices

Ensure the planer is unplugged before connecting any devices.

Connect the dust port to a compatible vacuum.
Ensure all cables are secure and not in the way of the planer.

Tip: Use a dedicated circuit for the planer to avoid tripping breakers.

Operating the Planer

Follow these steps to operate the planer effectively:

Power on the planer and set the desired depth.
Feed the wood slowly and steadily into the planer.
Monitor the output for smoothness and adjust as necessary.

WARNING! Do not force the wood through the planer.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the dust port and blades after each use.
Check and replace blades as needed.
Inspect the power cord for damage.

CAUTION! Always unplug the planer before performing maintenance.

Safety Information

Read all safety instructions before operating the planer. Always wear appropriate safety gear.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Planer not starting	Power supply issue	Check power cord and outlet.
Uneven cuts	Blades dull	Sharpen or replace blades.
Excessive noise	Loose parts	Tighten screws and check for loose components.
Dust not collecting	Clogged dust port	Clear any blockages in the dust port.

Service: For assistance, contact Dewalt customer service.