Dewalt 735 Planer Owners Manual

The Dewalt 735 Planer is a powerful and versatile tool designed for professional woodworkers and DIY enthusiasts. This 13-inch thickness planer features a two-speed gear box, allowing users to choose between a faster feed rate for dimensioning lumber and a slower feed rate for a finer finish. The machine is equipped with a 15-amp motor that delivers a smooth and consistent cut, making it ideal for a variety of woodworking projects. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Planer 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 13-inch cutting width, two-speed gear box, 15-amp motor, and adjustable depth control.

Feature	Description
Two-speed gear box	Allows for faster feed rate or finer finish
15-amp motor	Provides powerful performance for various materials
Adjustable depth control	Enables precise thickness adjustments
Dust port	Connects to dust collection systems for cleaner operation
Foldable infeed/outfeed tables	Supports longer workpieces for stability

Installation

Unpack and inspect contents. Place the planer on a stable work surface.

Ensure the work area is clean and free of obstructions.
Attach the dust collection system to the dust port.
Plug the planer into a grounded outlet.
Check that all components are securely fastened.

WARNING! Always use proper safety equipment when operating the planer.

First-Time Setup

Power on the planer and adjust the depth settings according to the material being planed.

Set the desired thickness using the depth adjustment knob.
Ensure the planer is securely positioned on the work surface.
Run a test piece to ensure settings are correct.

CAUTION! Always keep hands clear of the cutting area.

Specifications

Planer Width: 13 inches.
Motor: 15-amp.
Feed Rate: 28 ft/min or 18 ft/min.
Max Depth of Cut: 1/8 inch.
Weight: 80 lbs.
Dust Port Diameter: 2-1/2 inches.

Controls and Settings

Access the depth adjustment knob and speed selector switch located on the front panel.

Safety Features: Equipped with a safety lock to prevent accidental start-up.

Connecting Devices

Connect the dust collection system to the dust port for optimal performance.

Ensure the planer is turned off before connecting any devices.
Use appropriate hoses for dust collection.
Check for secure connections before operating.

Tip: Regularly check and clean the dust port to maintain efficiency.

Operating the Planer

Follow these steps to operate the planer safely and effectively.

Adjust the depth of cut as needed.
Feed the wood slowly and steadily into the planer.
Monitor the operation for any unusual sounds or vibrations.
Turn off the planer when finished and unplug it from the outlet.

WARNING! Do not force the wood through the planer.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the dust port and surrounding area after each use.
Check and replace blades as needed.
Inspect electrical components for wear or damage.

CAUTION! Always unplug the planer before performing maintenance.

Safety Information

Always follow safety guidelines when operating the planer.

Wear safety goggles and ear protection.
Keep hands away from the cutting area.
Do not operate in wet conditions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Planer won't start	Power supply issue	Check power cord and outlet.
Uneven cut	Blades dull or misaligned	Inspect and replace or adjust blades.
Excessive noise	Loose components	Tighten all screws and bolts.
Dust collection ineffective	Clogged dust port	Clear any obstructions in the dust port.

Service: For further assistance, contact Dewalt customer service.