Dewalt 740 Powershop Radial Arm Saw Manual

The Dewalt 740 Powershop Radial Arm Saw is a versatile tool designed for precision cutting in various materials. It features a powerful motor, adjustable cutting angles, and a robust design suitable for both professional and DIY projects. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Adjustable cutting head, powerful motor, precision cutting table, safety features, and easy-to-use controls.

Installation

Unpack and inspect contents. Place the saw on a stable workbench.

1. Ensure the work area is clean and well-lit.
2. Secure the saw to the workbench using appropriate fasteners.
3. Connect to a power source that meets the voltage requirements.
4. Check all safety features before use.

WARNING! Ensure the saw is properly secured to avoid accidents during operation.

First-Time Setup

Power on the saw; follow the setup instructions provided in the manual.

1. Adjust the cutting head to the desired angle.
2. Set the depth of cut using the adjustment knob.
3. Test the saw with a scrap piece of material.
4. Familiarize yourself with the controls and safety features.

CAUTION! Always wear appropriate safety gear when operating the saw.

Specifications

• Model: Dewalt 740 Powershop.
• Motor Power: 15 Amps.
• Blade Size: 10 inches.
• Cutting Capacity: Up to 6 inches depth.
• Weight: 75 lbs.
• Dimensions: 30 x 20 x 15 inches.
• Power Source: 120V AC.
• Safety Features: Blade guard, emergency shut-off.

Controls and Settings

Access the main controls located on the front panel of the saw. Key controls include the power switch, angle adjustment lever, and depth adjustment knob.

Safety Switch: Must be engaged before the saw can operate.

Adjustments can be made easily for various cutting tasks.

Connecting Devices

Ensure the saw is unplugged before making any connections. Use appropriate extension cords if necessary.

1. Connect to a power source that meets the voltage requirements.
2. Ensure all connections are secure and free from damage.
3. Check for proper grounding of the electrical outlet.

Tip: Always use a surge protector to prevent damage from power surges.

Operating the Saw

Follow these steps to operate the saw safely and effectively.

1. Power on the saw using the main switch.
2. Adjust the cutting head and depth as needed.
3. Feed the material slowly into the blade for a clean cut.
4. Always keep hands clear of the cutting area.

WARNING! Never reach over the blade while it is in motion.

Maintenance

Regular maintenance is essential for optimal performance.

1. Keep the saw clean and free from debris.
2. Check and replace the blade as needed.
3. Lubricate moving parts according to the manual.
4. Inspect electrical components for wear or damage.

CAUTION! Always unplug the saw before performing maintenance.

Safety Information

Always follow safety guidelines when operating the saw.

• Wear safety goggles and hearing protection.
• Keep work area clean and well-lit.
• Do not operate the saw under the influence of drugs or alcohol.
• Ensure all safety guards are in place before use.

Troubleshooting

Service: For further assistance, contact Dewalt customer service.