Dewalt 9.6 Volt Battery Charger Manual

The Dewalt 9.6 Volt Battery Charger is designed for charging Dewalt 9.6V NiCd and NiMH batteries. This manual provides essential information on safety, features, installation, operation, and troubleshooting to ensure optimal performance and longevity of your charger.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Charging Batteries 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Fast charging capability, LED indicator lights, compact design, and compatibility with multiple battery types.

Feature	Description
Fast Charging	Charges batteries quickly to minimize downtime.
LED Indicator Lights	Shows charging status and battery health.
Compact Design	Easy to store and transport.
Compatibility	Works with Dewalt 9.6V NiCd and NiMH batteries.

Installation

Unpack the charger and inspect for any damage. Place the charger on a stable surface away from moisture.

Plug the charger into a standard AC outlet.
Ensure the outlet is properly grounded.
Do not use an extension cord unless necessary.

WARNING! Do not expose the charger to rain or moisture to avoid electric shock.

First-Time Setup

Before using the charger for the first time, ensure it is properly connected to a power source.

Check the battery type and ensure compatibility.
Insert the battery into the charger until it clicks into place.
Observe the LED indicator for charging status.

CAUTION! Ensure the charger is unplugged when not in use.

Specifications

Input Voltage: 120V AC.
Output Voltage: 9.6V DC.
Charging Time: Approximately 1-2 hours depending on battery capacity.
Battery Compatibility: Dewalt 9.6V NiCd and NiMH batteries.
Weight: 1.5 lbs.
Dimensions: 6 x 4 x 3 inches.

Controls and Settings

The charger features a simple interface with an LED indicator that shows charging status: red for charging, green for fully charged.

Note: Do not attempt to modify the charger settings.

Connecting Devices

Ensure the charger is unplugged before connecting or disconnecting batteries.

Align the battery terminals with the charger contacts.
Press down firmly until the battery clicks into place.
Plug the charger into an AC outlet to begin charging.

Tip: Always check for debris on the battery terminals before connecting.

Charging Batteries

To charge a battery, simply insert it into the charger and plug the charger into an outlet. The LED indicator will show the charging status.

Insert the battery into the charger.
Plug the charger into the wall outlet.
Monitor the LED indicator for charging status.

WARNING! Do not leave the charger unattended while charging.

Safety Features

The charger is equipped with multiple safety features including overcharge protection and thermal overload protection to prevent damage to the battery.

Care & Cleaning

Unplug the charger before cleaning. Use a dry cloth to wipe the exterior; do not use liquids or abrasive materials.

CAUTION! Avoid exposing the charger to extreme temperatures or moisture.

Regulatory Information

This charger complies with FCC regulations and is certified for safety. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Charger does not work	No power supply	Check outlet and power cord.
Battery not charging	Incompatible battery	Ensure battery is compatible and properly seated.
LED indicator not lit	Faulty charger	Contact customer support for assistance.

Reset: Unplug and replug the charger to reset.

Service: 1-800-433-9258; www.dewalt.com