Dewalt Battery Charger Manual DCB115

The Dewalt DCB115 is a compact battery charger designed for Dewalt 12V and 20V MAX lithium-ion batteries. It features a lightweight design, LED indicator lights for charging status, and a built-in fan for cooling during operation. This manual provides essential information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Charging Batteries 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Compact design, LED indicators, built-in fan, compatible with Dewalt 12V and 20V MAX batteries.

Feature	Description
LED Indicator Lights	Shows charging status (charging, charged, or fault)
Built-in Fan	Helps cool the charger during operation
Compact Design	Easy to store and transport
Compatibility	Works with Dewalt 12V and 20V MAX lithium-ion batteries

Installation

Unpack the charger and inspect for any damage. Place it on a stable surface away from moisture.

Connect the charger to a power outlet using the provided cord.
Ensure the outlet is functioning properly.
Keep the charger in a well-ventilated area during operation.

WARNING! Do not expose the charger to rain or moisture to avoid electric shock.

First-Time Setup

Plug the charger into an appropriate power outlet. Ensure the LED indicator lights up.

Insert the battery into the charger.
Observe the LED indicator for charging status.
Remove the battery once fully charged.

CAUTION! Do not leave the battery in the charger for extended periods after charging is complete.

Specifications

Model: DCB115
Input Voltage: 120V AC
Output Voltage: 12V and 20V MAX
Charging Time: Approximately 30-60 minutes depending on battery size
Weight: 1.5 lbs
Dimensions: 8 x 5 x 3 inches
Cooling System: Built-in fan

Controls and Settings

The charger features a simple interface with LED indicators to show the charging status. There are no additional controls required for operation.

Connecting Devices

To charge a battery, simply insert it into the charger until it clicks into place.

Ensure the charger is unplugged before inserting or removing batteries.
Align the battery with the charger contacts.
Plug the charger into a power outlet.

Tip: Always check the battery for damage before charging.

Charging Batteries

The DCB115 charger is designed to charge Dewalt 12V and 20V MAX batteries efficiently.

Insert the battery into the charger.
Monitor the LED indicator for charging status.
Once fully charged, remove the battery and store it properly.

WARNING! Do not attempt to charge non-Dewalt batteries.

Safety Features

The charger includes several safety features to protect against overheating and overcharging.

Automatic shut-off when battery is fully charged.
Over-temperature protection.
Short-circuit protection.

Care & Cleaning

Unplug the charger before cleaning. Use a dry cloth to wipe the exterior; do not use liquids.

CAUTION! Avoid exposing the charger to moisture or extreme temperatures.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Charger does not power on	Power outlet issue	Check outlet and power cord connections.
Battery not charging	Faulty battery	Inspect battery for damage; replace if necessary.
LED indicator not lit	Charger malfunction	Contact customer support for assistance.

Service: For support, contact Dewalt customer service or visit www.dewalt.com.