Dewalt Charger 18V Manual

The Dewalt 18V Charger is designed to charge Dewalt 18V batteries efficiently and safely. It features a compact design, LED indicators for charging status, and compatibility with various Dewalt battery models. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Charging Batteries 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Compact design, LED charging indicators, compatibility with various 18V batteries, and built-in safety features.

Feature	Description
LED Indicators	Shows charging status (charging, charged, error)
Compact Design	Easy to store and transport
Safety Features	Overcharge protection and thermal protection
Compatibility	Works with all Dewalt 18V batteries

Installation

Unpack and inspect the charger. Place it on a stable surface away from moisture.

Connect the charger to a power outlet.
Ensure the power indicator lights up.
Place the battery in the charger.

WARNING! Do not expose the charger to water or extreme temperatures.

First-Time Setup

Power on the charger; ensure it is connected to a power source.

Insert the battery into the charger.
Check the LED indicator for charging status.
Follow any additional prompts on the charger display.

CAUTION! Ensure the charger is placed on a flat surface during use.

Specifications

Input Voltage: 120V AC.
Output Voltage: 18V DC.
Charging Time: Approximately 1 hour for standard batteries.
Compatibility: Dewalt 18V batteries (various models).
Weight: 2.5 lbs.
Dimensions: 8 x 6 x 4 inches.
Safety Certifications: UL listed, CE certified.

Controls and Settings

Access the charging status via LED indicators. The charger has a single button for power on/off.

LED Indicators: Green for fully charged, Red for charging, and Blinking Red for error.

Connecting Devices

Ensure the charger is unplugged before connecting or disconnecting batteries.

Align the battery with the charger contacts.
Press down firmly until the battery clicks into place.
Plug the charger into a power outlet.

Tip: Always check for debris on the battery contacts before charging.

Charging Batteries

Supports Dewalt 18V batteries for quick and efficient charging.

Insert the battery into the charger.
Monitor the LED indicator for charging status.
Remove the battery once fully charged.

WARNING! Do not leave the battery in the charger for extended periods after fully charged.

Safety Features

Includes overcharge protection, thermal protection, and short-circuit protection to ensure safe operation.

Care & Cleaning

Unplug the charger before cleaning. Use a dry cloth to wipe the exterior; do not use liquids.

CAUTION! Avoid exposing the charger to moisture or extreme temperatures.

Regulatory Information

Complies with FCC Part 15 regulations for digital devices. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Charger not powering on	Power outlet issue	Check outlet and power cord connection.
Battery not charging	Battery issue	Inspect battery for damage; try a different battery.
LED indicator blinking red	Charging error	Remove battery and reconnect; check for debris.
Overheating	Blocked ventilation	Ensure charger is in a well-ventilated area.

Reset: Unplug the charger for 10 seconds to reset.

Service: 1-800-433-9258; www.dewalt.com