Dewalt Compact Radial Arm Saw 710 Manual

The Dewalt Compact Radial Arm Saw 710 is a versatile tool designed for precision cutting in woodworking and construction projects. It features a powerful motor, adjustable arm, and a variety of cutting capabilities including crosscuts, rip cuts, and bevel cuts. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Saw 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Powerful motor, adjustable cutting arm, safety features, and various cutting modes.

Feature	Description
Powerful Motor	Delivers high performance for various cutting tasks
Adjustable Arm	Allows for precise angle adjustments
Safety Features	Includes blade guard and safety switch
Multiple Cutting Modes	Supports crosscuts, rip cuts, and bevel cuts

Installation

Unpack and inspect contents. Place on a stable surface.

Assemble the saw according to the manual.
Ensure all screws and bolts are tightened.
Connect to a power source.
Check alignment of the blade.

WARNING! Ensure the saw is securely mounted to avoid accidents.

First-Time Setup

Power on the saw and follow the setup instructions.

Adjust the blade height for the material being cut.
Set the desired angle for bevel cuts.
Test the saw with scrap material before actual use.

CAUTION! Always wear safety gear when operating the saw.

Specifications

Model: Dewalt Compact Radial Arm Saw 710
Motor Power: 15 Amps
Blade Size: 10 inches
Cutting Capacity: Up to 12 inches wide
Weight: 50 lbs
Power Source: 120V AC
Operating Temperature: Standard room temperature.

Controls and Settings

Access the settings via the control panel. Key controls include power switch, angle adjustment, and height adjustment.

Safety Switch: Prevents accidental start-up.

Connecting Devices

Ensure the saw is unplugged before connecting any devices or accessories.

Connect dust collection system if available.
Use appropriate extension cords for power supply.
Ensure all connections are secure before operation.

Tip: Regularly check connections for wear and tear.

Operating the Saw

Follow these steps for safe operation:

Ensure the work area is clear of obstacles.
Position the material securely against the fence.
Turn on the saw and allow the blade to reach full speed.
Make the cut smoothly and steadily.
Turn off the saw after completing the cut.

WARNING! Keep hands away from the blade at all times.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the saw after each use.
Check and replace the blade as needed.
Lubricate moving parts periodically.

CAUTION! Always unplug the saw before performing maintenance.

Safety Information

Read all safety instructions before operating the saw. Always wear appropriate safety gear.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Saw does not start	Power supply issue	Check power cord and outlet.
Blade not cutting	Dull blade	Replace or sharpen the blade.
Excessive vibration	Loose components	Tighten all screws and bolts.
Inaccurate cuts	Misalignment	Check and adjust the alignment of the blade.

Reset: Refer to the manual for reset instructions if available.

Service: Contact Dewalt customer service for further assistance.