Dewalt Compound Miter Saw DW703 Manual

The Dewalt Compound Miter Saw DW703 is a powerful tool designed for precision cutting of wood and other materials. It features a 12-inch blade, adjustable miter angles, and a robust motor that delivers high performance for both professional and DIY projects. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Saw 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 12-inch blade, adjustable miter angles, laser guide, dust collection port, and ergonomic handle.

Feature	Description
12-inch Blade	For precise crosscuts and miter cuts.
Adjustable Miter Angles	Allows for accurate angle cuts up to 50 degrees.
Laser Guide	Helps in aligning cuts for better accuracy.
Dust Collection Port	Connects to vacuum for cleaner workspace.
Ergonomic Handle	Provides comfort during extended use.

Installation

Unpack and inspect contents. Place on a stable surface.

Attach the saw to a workbench or stand for stability.
Ensure the power cord is properly connected to a power source.
Adjust the miter angle and bevel settings as needed.
Check that the blade is securely installed.

WARNING! Ensure all safety guards are in place before operating the saw.

First-Time Setup

Power on the saw and familiarize yourself with the controls.

Set the blade height for the material you will be cutting.
Adjust the miter angle to the desired position.
Test the saw on scrap material before making final cuts.

CAUTION! Always wear safety goggles and ear protection when operating the saw.

Specifications

Blade Size: 12 inches.
Motor Power: 15 amps.
Miter Angle Range: 0 to 50 degrees.
Bevel Angle Range: 0 to 45 degrees.
Weight: 45 lbs.
Dust Collection: Yes, with port.
Laser Guide: Yes, included.

Controls and Settings

Access the miter and bevel adjustments using the knobs located on the front of the saw.

Safety Features: Blade guard, electric brake, and safety switch.

Connecting Devices

Ensure the saw is unplugged before making any adjustments or connections.

Connect a vacuum to the dust collection port for cleaner operation.
Ensure the power source is compatible with the saw's requirements.

Tip: Always check connections before powering on the saw.

Operating the Saw

Follow these steps to operate the saw safely and effectively.

Adjust the miter and bevel settings as needed.
Place the material securely against the fence.
Power on the saw and allow the blade to reach full speed.
Make the cut, keeping hands clear of the blade.
Power off the saw after completing the cut.

WARNING! Never reach over the blade while it is in motion.

Safety Features

The saw is equipped with several safety features to prevent accidents.

Blade guard that automatically covers the blade when not in use.
Electric brake that stops the blade quickly.
Safety switch to prevent accidental start-up.

Care & Cleaning

Unplug the saw before cleaning. Use a dry cloth to remove dust and debris.

CAUTION! Do not use liquids or solvents for cleaning.

Regulatory Information

This product complies with all applicable safety standards and regulations. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Blade not spinning	Power issue	Check power connection and switch.
Inaccurate cuts	Misalignment	Check miter and bevel settings.
Excessive vibration	Loose parts	Inspect and tighten all screws and bolts.
Dust collection ineffective	Clogged port	Clear any debris from the dust port.

Reset: Refer to the manual for reset instructions if available.

Service: Contact Dewalt customer service for assistance.