Dewalt Compound Miter Saw DW708 Manual

The Dewalt Compound Miter Saw DW708 is a powerful tool designed for precision cutting of wood and other materials. It features a 12-inch blade, adjustable miter angles, and a robust motor that delivers high performance for various cutting tasks. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Saw 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 12-inch blade, adjustable miter and bevel angles, laser guide, and dust collection system.

Feature	Description
12-inch Blade	For precise crosscuts and miter cuts
Adjustable Miter Angles	Allows for accurate angle cuts up to 50 degrees
Laser Guide	Helps in aligning cuts accurately
Dust Collection	Minimizes debris for a cleaner workspace
Powerful Motor	Delivers high performance for tough materials

Installation

Unpack and inspect contents. Place on a stable surface.

Secure the saw to a workbench or stand.
Connect the dust collection system if available.
Ensure the power cord is in good condition and plugged into a suitable outlet.

WARNING! Ensure all safety guards are in place before operating.

First-Time Setup

Power on the saw; adjust the miter and bevel settings as needed.

Set the miter angle using the adjustment knob.
Adjust the bevel angle for compound cuts.
Test the laser guide alignment before making cuts.

CAUTION! Always wear safety goggles when operating the saw.

Specifications

Blade Size: 12 inches.
Motor Power: 15 amps.
Miter Angle Range: 0 to 50 degrees.
Bevel Angle Range: 0 to 45 degrees.
Weight: 50 lbs.
Dust Collection: Yes, compatible with standard vacuum systems.

Controls and Settings

Access miter and bevel adjustments via the knobs located on the saw. The laser guide can be activated using the switch on the handle.

Safety Features: Blade guard, electric brake, and safety switch to prevent accidental starts.

Connecting Devices

Ensure the saw is unplugged before connecting any accessories.

Connect the dust collection system to the designated port.
Attach any additional accessories as per the manufacturer's instructions.

Tip: Always check connections before operating the saw.

Operating the Saw

Follow these steps to operate the saw safely and effectively.

Adjust the miter and bevel angles as needed.
Place the material securely against the fence.
Power on the saw and make the cut.
Always wait for the blade to stop before removing the material.

WARNING! Keep hands away from the blade at all times.

Safety Features

The Dewalt DW708 is equipped with several safety features including a blade guard, electric brake, and a safety switch to prevent accidental starts.

Care & Cleaning

Unplug the saw before cleaning. Use a dry cloth to clean the exterior; avoid using liquids.

CAUTION! Do not spray liquids; keep away from heat and moisture.

Regulatory Information

This product complies with applicable safety standards and regulations. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Blade not spinning	Power issue	Check power connection and switch.
Inaccurate cuts	Misalignment	Check and adjust miter and bevel settings.
Excessive vibration	Loose components	Tighten all screws and bolts.
Dust not collecting	Clogged dust port	Clear any obstructions in the dust collection system.

Reset: Refer to the manual for reset procedures if applicable.

Service: For service inquiries, contact Dewalt customer support.