Dewalt Compound Mitre Saw 12 DW708 Owners Manual

The Dewalt Compound Mitre Saw 12 DW708 is a powerful and versatile tool designed for precision cutting of wood, plastic, and other materials. With its dual bevel capability, adjustable miter angles, and a robust motor, this saw is ideal for both professional contractors and DIY enthusiasts. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Saw 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 12-inch blade, dual bevel capability, adjustable miter angles, laser guide, and dust collection system.

Feature	Description
12-inch Blade	Provides precise cuts for various materials.
Dual Bevel Capability	Allows for angled cuts in both directions.
Laser Guide	Helps in aligning cuts accurately.
Dust Collection System	Minimizes debris for a cleaner workspace.
Adjustable Miter Angles	Offers flexibility for different cutting needs.

Installation

Unpack and inspect contents. Ensure a stable and secure work surface.

Attach the saw to a workbench or stand for stability.
Connect the dust collection system if available.
Ensure all safety guards are in place before use.

WARNING! Always wear safety goggles and hearing protection while operating the saw.

First-Time Setup

Power on the saw; follow setup instructions carefully.

Adjust the blade height for the material being cut.
Set the miter angle according to your cutting needs.
Test the laser guide alignment before making cuts.

CAUTION! Ensure the saw is unplugged when making adjustments.

Specifications

Blade Size: 12 inches.
Motor Power: 15 amps.
Bevel Capacity: Dual bevel up to 45 degrees.
Miter Capacity: Up to 50 degrees left and right.
Weight: Approximately 50 lbs.
Dust Port Diameter: 2.5 inches.
Voltage: 120V AC.

Controls and Settings

Access settings via the control panel. Key controls include power switch, bevel adjustment, and miter adjustment.

Safety Features: Blade guard, electric brake, and trigger lock.

Connecting Devices

Ensure proper connections for dust collection and power supply.

Connect the dust collection hose to the port.
Plug the saw into a grounded outlet.

Tip: Use a surge protector for added safety.

Operating the Saw

Follow these steps for safe operation:

Adjust the miter and bevel settings as needed.
Place the material securely against the fence.
Power on the saw and make the cut smoothly.

WARNING! Keep hands away from the blade during operation.

Maintenance

Regular maintenance is essential for optimal performance.

Keep the blade clean and sharp.
Check and replace worn parts as necessary.
Inspect electrical components for damage.

CAUTION! Unplug the saw before performing maintenance.

Safety Information

Always follow safety guidelines to prevent accidents.

Wear appropriate personal protective equipment (PPE).
Keep the work area clean and free of hazards.
Do not operate the saw under the influence of drugs or alcohol.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Blade not spinning	Power issue	Check power connection and switch.
Inaccurate cuts	Misalignment	Check and adjust the blade alignment.
Excessive vibration	Worn bearings	Inspect and replace bearings if necessary.
Dust collection ineffective	Clogged hose	Clear any blockages in the dust port.

Reset: Refer to the manual for resetting procedures if available.

Service: Contact Dewalt customer service for assistance.