Dewalt Compound Sliding Miter Saw Manual

The Dewalt Compound Sliding Miter Saw is designed for precision cutting and versatility. It features a powerful motor, adjustable bevel and miter settings, and a large cutting capacity, making it ideal for both professional contractors and DIY enthusiasts. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Dual bevel design, sliding feature for wider cuts, laser guide for precision, and adjustable miter angles.

Installation

Unpack and inspect the saw. Place it on a stable work surface.

1. Secure the saw to the workbench using clamps.
2. Ensure the power cord is free from obstructions.
3. Check that the blade is properly installed and tightened.
4. Plug into a suitable power outlet.

WARNING! Always ensure the saw is unplugged when making adjustments or changing the blade.

First-Time Setup

Power on the saw; familiarize yourself with the controls.

1. Adjust the miter angle to your desired setting.
2. Set the bevel angle as needed for your cut.
3. Test the laser guide alignment before making cuts.
4. Practice cutting scrap wood to ensure accuracy.

CAUTION! Always wear safety goggles and hearing protection when operating the saw.

Specifications

• Power: 15 amp motor.
• Blade Size: 12 inches.
• Cutting Capacity: 2x8 at 90 degrees, 2x6 at 45 degrees.
• Miter Angles: 0 to 60 degrees left and right.
• Bevel Angles: 0 to 48 degrees left and right.
• Weight: 56 lbs.
• Dimensions: 30 x 22 x 18 inches.

Controls and Settings

Access the miter and bevel controls located on the front and side of the saw. The power switch is easily accessible for quick operation.

Laser Guide: Activate using the dedicated switch for precise cutting.

Adjust the height of the saw using the height adjustment knob for optimal cutting performance.

Connecting Devices

Ensure the saw is unplugged before connecting any accessories.

1. Attach the dust collection bag to minimize debris.
2. Connect any additional guides or extensions as needed.
3. Ensure all connections are secure before operating.

Tip: Regularly check connections for wear and tear.

Operating the Saw

Follow proper operating procedures for safety and efficiency.

1. Adjust the miter and bevel settings as required.
2. Place the material securely against the fence.
3. Power on the saw and allow the blade to reach full speed.
4. Make the cut smoothly and steadily.
5. Turn off the saw and wait for the blade to stop before removing the material.

WARNING! Never reach into the cutting area while the saw is running.

Maintenance

Regular maintenance ensures optimal performance and longevity.

1. Keep the saw clean and free of debris.
2. Inspect the blade regularly for wear and replace as necessary.
3. Lubricate moving parts as per the manufacturer's guidelines.
4. Store the saw in a dry place when not in use.

CAUTION! Always unplug the saw before performing maintenance.

Safety Information

Always follow safety guidelines to prevent accidents.

• Wear appropriate personal protective equipment (PPE).
• Keep hands away from the blade during operation.
• Ensure the work area is clean and well-lit.
• Do not operate the saw while under the influence of drugs or alcohol.

Troubleshooting

Reset: Refer to the manual for resetting procedures if available.

Service: Contact Dewalt customer service for assistance.