Dewalt Cordless Reciprocating Saw Instruction Manual

The Dewalt Cordless Reciprocating Saw is designed for cutting through various materials with ease and precision. It features a powerful motor, adjustable speed settings, and a lightweight design for optimal control. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting the Battery 7. Operating the Saw 8. Maintenance 9. Troubleshooting

Features at a Glance

Key components: Brushless motor, variable speed trigger, adjustable shoe, and LED work light.

Feature	Description
Brushless Motor	Provides longer runtime and durability.
Variable Speed Trigger	Allows for precise control of cutting speed.
Adjustable Shoe	Extends blade life and provides better cutting depth control.
LED Work Light	Illuminates dark work areas for better visibility.
Lightweight Design	Enhances maneuverability and reduces user fatigue.

Safety Information

Always wear safety goggles and gloves when operating the saw. Ensure the work area is clear of obstructions and that you have a stable footing.

Read all instructions before using the saw.
Keep hands away from the cutting area.
Disconnect the battery when not in use.
Do not operate in wet or damp conditions.

WARNING! Failure to follow safety instructions may result in serious injury.

First-Time Setup

Before using the saw, ensure the battery is fully charged and properly connected.

Insert the battery until it clicks into place.
Check that the blade is securely attached.
Test the saw in a safe area before starting your project.

CAUTION! Ensure the saw is turned off before changing blades.

Specifications

Model: DCS367B
Battery Voltage: 20V MAX
Stroke Length: 1-1/8 inches
Speed: 0-2900 SPM
Weight: 5.0 lbs
Blade Type: Universal
Warranty: 3 years limited warranty

Controls and Settings

The saw features a variable speed trigger for controlling cutting speed and an adjustable shoe for depth control.

Blade Release: Tool-free blade change for quick and easy blade swaps.

Connecting the Battery

Ensure the saw is turned off before inserting the battery. Align the battery with the slot and push until it clicks into place.

Operating the Saw

To operate the saw, press the variable speed trigger and guide the saw through the material.

Start with a slow speed for better control.
Apply steady pressure without forcing the saw.
Release the trigger to stop the saw.

WARNING! Always keep hands clear of the cutting area.

Maintenance

Regularly check the saw for wear and tear. Clean the saw after each use and store in a dry place.

CAUTION! Disconnect the battery before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Saw does not start	Battery not connected	Check battery connection and charge.
Blade not cutting	Blade dull or damaged	Replace blade with a new one.
Excessive vibration	Loose blade	Tighten blade securely.
Battery drains quickly	Old battery	Replace with a new battery.

Service: For further assistance, contact Dewalt customer service.