Dewalt D25602 Manual

The Dewalt D25602 is a powerful rotary hammer designed for heavy-duty applications. It features a 2.6 Joules impact energy for fast drilling and chipping in concrete and masonry. The tool is equipped with a variable speed control for precise operation and a durable design for long-lasting performance. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Hammer 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Powerful motor, variable speed control, ergonomic design, and durable construction.

Feature	Description
Impact Energy	2.6 Joules for efficient drilling and chipping
Variable Speed Control	Allows for precise operation based on material
Ergonomic Design	Comfortable grip for extended use
Durable Construction	Built to withstand tough job site conditions
Depth Stop	Ensures consistent drilling depth
Side Handle	Provides additional control and stability

Installation

Before using the Dewalt D25602, ensure proper installation of the drill bit and safety precautions are followed.

Choose the appropriate drill bit for your application.
Insert the drill bit into the chuck and tighten securely.
Connect to a power source and ensure the tool is in the off position before plugging in.

WARNING! Always wear safety goggles and gloves when operating the tool.

First-Time Setup

Power on the tool and familiarize yourself with its controls and features.

Adjust the speed setting according to the material being drilled.
Practice drilling on a scrap piece to get a feel for the tool.
Ensure all safety features are functioning properly before use.

CAUTION! Always check for hidden electrical wires or plumbing before drilling.

Specifications

Power: 8.5 Amps.
Impact Energy: 2.6 Joules.
Speed: 0-1,200 RPM.
Weight: 6.5 lbs.
Chuck Size: SDS Plus.
Tool Length: 12.5 inches.
Power Source: Corded electric.

Controls and Settings

The Dewalt D25602 features a variable speed trigger, a mode selector for drilling and chiseling, and a lock-on button for continuous operation.

Controls: Trigger switch, mode selector, speed adjustment dial.

Connecting Devices

Ensure the tool is unplugged before connecting any accessories.

Attach the appropriate drill bit securely into the chuck.
Connect to a power source.
Check all connections before powering on.

Tip: Always use the correct bit for the material to avoid damage.

Operating the Hammer

Follow these steps for effective operation of the Dewalt D25602.

Power on the tool and select the desired mode.
Apply steady pressure while drilling.
Allow the tool to do the work; do not force it.

WARNING! Keep hands and body clear of the drill bit while in operation.

Maintenance

Regular maintenance is essential for optimal performance.

Clean the tool after each use.
Inspect the cord and plug for damage.
Lubricate moving parts as recommended in the manual.

CAUTION! Unplug the tool before performing any maintenance.

Safety Information

Always follow safety guidelines to prevent accidents.

Wear appropriate personal protective equipment.
Keep work area clean and well-lit.
Do not operate the tool if you are tired or under the influence.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Tool does not start	Power source issue	Check power connection and outlet.
Excessive vibration	Improper bit or worn parts	Inspect and replace as necessary.
Overheating	Continuous use	Allow tool to cool down before resuming.
Inconsistent drilling	Worn drill bit	Replace drill bit with a new one.

Reset: If applicable, refer to the manual for reset instructions.

Service: For assistance, contact Dewalt customer service.