Dewalt DBC106 Manual

The Dewalt DBC106 is a high-performance cordless battery charger designed for Dewalt's 20V MAX and 60V MAX lithium-ion batteries. It features a fast charging capability, LED indicators for charge status, and a compact design for easy storage. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating Instructions 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Fast charging capability, LED charge indicators, compact design, compatible with Dewalt 20V MAX and 60V MAX batteries.

Feature	Description
Fast Charging	Charges batteries quickly to minimize downtime.
LED Indicators	Shows charging status and battery health.
Compact Design	Easy to store and transport.
Compatibility	Works with both 20V MAX and 60V MAX batteries.
Durability	Built to withstand job site conditions.

Installation

Unpack the charger and inspect for any damage. Place it on a stable surface near a power outlet.

Connect the charger to a power outlet.
Ensure the area is dry and free from moisture.
Keep the charger away from heat sources.

WARNING! Do not use the charger in wet conditions to avoid electric shock.

First-Time Setup

Power on the charger; insert the battery into the charging slot.

Check the LED indicator for charging status.
Remove the battery once fully charged.
Store the charger in a cool, dry place when not in use.

CAUTION! Ensure the battery is compatible with the charger.

Specifications

Input Voltage: 120V AC.
Output Voltage: 20V/60V DC.
Charging Time: Approximately 60 minutes for a 20V battery.
Weight: 2.5 lbs.
Dimensions: 10 x 7 x 4 inches.
Compatibility: Dewalt 20V MAX and 60V MAX batteries.
Warranty: 3 years limited warranty.

Controls and Settings

Access charging options via the LED indicators. The charger automatically detects battery type and adjusts charging accordingly.

LED Indicators: Green for fully charged, Red for charging, Flashing Red for error.

Connecting Devices

Ensure the charger is unplugged before connecting or disconnecting batteries.

Align the battery with the charging slot.
Press down until the battery clicks into place.
Check the LED indicator for charging status.

Tip: Always use Dewalt batteries for optimal performance.

Operating Instructions

To operate, simply insert the battery into the charger and plug it in. The charger will automatically begin charging.

Monitor the LED indicators for charging status.
Remove the battery once fully charged.

WARNING! Do not leave the battery on the charger for extended periods after it is fully charged.

Safety Features

The charger includes overcharge protection, short circuit protection, and thermal protection to ensure safe operation.

Care & Cleaning

Unplug the charger before cleaning. Use a dry cloth to wipe the exterior; do not use liquids or aerosols.

CAUTION! Avoid exposing the charger to moisture.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Charger not working	No power	Check power outlet and connections.
Battery not charging	Incompatible battery	Ensure battery is compatible with charger.
LED indicator not lit	Faulty charger	Contact customer service for assistance.
Overheating	Blocked ventilation	Ensure charger is in a well-ventilated area.

Reset: Unplug the charger for 10 seconds and plug it back in.

Service: Contact Dewalt customer service for support.