Dewalt DC9000 Charger Manual

The Dewalt DC9000 is a high-performance battery charger designed for Dewalt 18V and 24V batteries. This charger features advanced charging technology that ensures optimal battery life and performance. It is equipped with LED indicators for charging status, overcharge protection, and a compact design for easy storage. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Charging Batteries 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Fast charging capability, LED status indicators, compact design, compatible with Dewalt 18V and 24V batteries.

Feature	Description
Fast Charging	Charges batteries quickly to minimize downtime.
LED Indicators	Displays charging status and alerts for any issues.
Overcharge Protection	Prevents battery damage by stopping charging when full.
Compact Design	Easy to store and transport.
Compatibility	Works with Dewalt 18V and 24V batteries.

Installation

Unpack the charger and inspect for any damage. Place it on a stable surface away from moisture.

Connect the charger to a power outlet.
Ensure the power switch is in the ON position.
Check that the LED indicators are functioning.

WARNING! Do not expose the charger to water or extreme temperatures.

First-Time Setup

Plug in the charger and ensure it is powered on. Follow the LED indicators for proper operation.

Insert the battery into the charger.
Observe the LED indicator for charging status.
Remove the battery once fully charged.

CAUTION! Ensure the charger is unplugged when not in use.

Specifications

Input Voltage: 120V AC.
Output Voltage: 18V and 24V.
Charging Time: Approximately 1 hour for 18V batteries.
Weight: 2.5 lbs.
Dimensions: 10 x 6 x 4 inches.
LED Indicators: Charging, charged, and fault indicators.

Controls and Settings

The charger features a simple interface with a power switch and LED indicators for easy operation.

LED Indicators: Green for fully charged, Red for charging, and Blinking Red for fault.

Connecting Devices

Ensure the charger is unplugged before connecting or disconnecting batteries.

Align the battery with the charger terminals.
Press down until the battery clicks into place.
Plug in the charger to start charging.

Tip: Always check for proper alignment before charging.

Charging Batteries

To charge a battery, simply insert it into the charger and plug it in. The LED indicator will show the charging status.

Insert the battery into the charger.
Check the LED indicator for charging status.
Remove the battery once the green light is on.

WARNING! Do not leave batteries unattended while charging.

Safety Features

The Dewalt DC9000 charger includes several safety features to protect both the charger and the battery.

Overcharge protection to prevent battery damage.
Short circuit protection to avoid electrical hazards.
Thermal protection to prevent overheating.

Care & Cleaning

Unplug the charger before cleaning. Use a dry cloth to wipe the exterior; do not use liquids.

CAUTION! Avoid using abrasive materials that could damage the surface.

Regulatory Information

This charger complies with FCC regulations and is designed for residential use. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Charger not working	No power	Check power outlet and connections.
LED indicator not lit	Faulty battery	Replace battery and try again.
Battery not charging	Improper connection	Ensure battery is seated correctly.
Overheating	Blocked ventilation	Ensure charger is in a well-ventilated area.

Reset: Unplug and replug the charger to reset.

Service: 1-800-433-9258; www.dewalt.com