Dewalt DCB105 Charger Manual

The Dewalt DCB105 is a versatile battery charger designed for use with Dewalt 12V to 20V MAX lithium-ion batteries. It features a compact design, LED indicator lights for charging status, and a built-in fan for cooling during charging. This manual provides essential information on safety, features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Charging Batteries 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Compact design, LED indicators, built-in cooling fan, compatible with Dewalt 12V to 20V MAX batteries.

Feature	Description
LED Indicators	Shows charging status (charging, charged, or fault)
Cooling Fan	Helps maintain optimal temperature during charging
Compact Design	Easy to store and transport
Compatibility	Works with Dewalt 12V to 20V MAX lithium-ion batteries

Installation

Unpack the charger and inspect for any damage. Place the charger on a stable surface away from moisture.

Plug the charger into a standard electrical outlet.
Ensure the area is well-ventilated.
Do not cover the charger during operation.

WARNING! Ensure the charger is unplugged when not in use.

First-Time Setup

Power on the charger; insert the battery to begin charging.

Check battery compatibility.
Align the battery with the charger and push down until it clicks.
Observe the LED indicators for charging status.

CAUTION! Do not attempt to charge non-Dewalt batteries.

Specifications

Input Voltage: 120V AC.
Output Voltage: 12V to 20V DC.
Charging Time: Varies by battery size.
Weight: 1.5 lbs.
Dimensions: 8 x 5 x 3 inches.
Cooling: Built-in fan for temperature control.

Controls and Settings

Access charging status via LED indicators. No additional controls required for operation.

LED Indicators: Green (charged), Red (charging), Flashing Red (fault).

Connecting Devices

Ensure the charger is unplugged before connecting or disconnecting batteries.

Align the battery with the charger.
Push down until the battery clicks into place.
Plug the charger into an outlet to begin charging.

Tip: Always check battery compatibility before charging.

Charging Batteries

Supports Dewalt 12V to 20V MAX lithium-ion batteries.

Insert battery into the charger.
Observe LED indicators for charging status.
Remove battery once fully charged.

WARNING! Do not leave batteries unattended while charging.

Maintenance

Keep the charger clean and free from debris. Inspect for damage regularly.

CAUTION! Unplug the charger before cleaning.

Regulatory Information

Complies with FCC regulations for safety and efficiency. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Charger does not power on	Power source issue	Check outlet and power cord.
Battery not charging	Incompatible battery	Ensure battery is Dewalt compatible.
LED indicator flashing red	Fault detected	Disconnect battery and inspect for damage.
Overheating	Blocked ventilation	Ensure charger is in a well-ventilated area.

Reset: Unplug and replug the charger to reset.

Service: 1-800-433-9258; www.dewalt.com