Dewalt DCD995 Manual

The Dewalt DCD995 is a powerful 20V MAX Lithium Ion Brushless Compact Hammer Drill/Driver designed for heavy-duty applications. It features a high-performance brushless motor that delivers up to 2,000 RPM and 650 unit watts out of maximum power for superior performance. The drill is equipped with a 3-speed, all-metal transmission for increased runtime and durability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating Instructions 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Brushless motor, 3-speed transmission, LED light, ergonomic handle, and keyless chuck.

Feature	Description
Brushless motor	Provides longer runtime and durability
3-speed transmission	Offers versatility for various applications
LED light	Illuminates dark work areas
Ergonomic handle	Improves comfort during use
Keyless chuck	Allows for quick and easy bit changes

Installation

Ensure the drill is powered off before installation. Follow the steps below to install the battery and bits.

Insert the battery pack into the tool until it clicks.
To install a bit, open the keyless chuck by turning it counterclockwise.
Insert the bit and tighten the chuck by turning it clockwise.
Check that the bit is secure before use.

WARNING! Always wear safety goggles when operating the drill.

First-Time Setup

Power on the drill; ensure the battery is fully charged.

Check the battery level indicator on the battery pack.
Familiarize yourself with the controls and settings.
Practice using the drill on scrap material before starting your project.

CAUTION! Ensure the drill is set to the correct mode for your application.

Specifications

Voltage: 20V MAX Lithium Ion.
Motor Type: Brushless.
Max RPM: 2000 RPM.
Max Torque: 650 in-lbs.
Chuck Size: 1/2 inch.
Weight: 4.6 lbs.
Battery Type: Lithium Ion.

Controls and Settings

Access the speed settings via the gear selector on the top of the drill. The LED light can be activated by pressing the trigger.

Speed Settings: Low, Medium, High.

Torque settings can be adjusted using the torque adjustment ring located just above the chuck.

Connecting Devices

This drill is a standalone tool and does not require external connections. Ensure the battery is charged for optimal performance.

Operating Instructions

To operate the drill, follow these steps:

Set the drill to the desired speed and torque.
Press the trigger to start drilling.
Release the trigger to stop.
Always maintain a firm grip on the drill while in use.

WARNING! Do not exceed the recommended RPM for the material being drilled.

Maintenance

Regular maintenance will ensure the longevity of your drill. Clean the exterior with a damp cloth and check for any loose screws or parts.

CAUTION! Do not use solvents or harsh chemicals for cleaning.

Safety Information

Always follow safety guidelines when operating power tools. Wear appropriate personal protective equipment (PPE) and ensure the work area is clear of hazards.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Drill won't start	Battery not charged	Charge the battery and try again.
Bit slipping	Chuck not tightened	Tighten the chuck securely.
Overheating	Continuous use	Allow the drill to cool down before continuing.
Low power	Battery nearing end of life	Replace the battery with a new one.

Reset: If issues persist, consult the user manual or contact customer support.

Service: For assistance, contact Dewalt customer service.