Dewalt DE9116 Battery Charger Manual

The Dewalt DE9116 is a versatile battery charger designed for charging Dewalt 12V and 18V NiCd and NiMH batteries. This manual provides essential information on features, installation, operation, and troubleshooting to ensure optimal performance and safety.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Charging Batteries 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Fast charging capability, LED indicator lights, compatibility with multiple battery types, and built-in safety features to prevent overheating.

Feature	Description
Fast Charging	Charges batteries quickly to minimize downtime.
LED Indicators	Displays charging status and battery condition.
Compatibility	Works with Dewalt 12V and 18V NiCd/NiMH batteries.
Safety Features	Overcharge protection and thermal shutdown.

Installation

Unpack the charger and inspect for any damage. Place the charger on a stable, dry surface away from direct sunlight.

Connect the charger to a power outlet.
Ensure the power switch is in the "ON" position.
Check that the LED indicators are functioning.

WARNING! Do not expose the charger to moisture or extreme temperatures.

First-Time Setup

Before using the charger for the first time, ensure it is properly installed and connected to a power source.

Insert the battery into the charger.
Observe the LED indicator to confirm charging has begun.
Allow the battery to charge fully before first use.

CAUTION! Always follow safety guidelines when handling batteries.

Specifications

Input Voltage: 120V AC.
Output Voltage: 12V and 18V.
Charging Time: Approximately 1 hour for most batteries.
Battery Types: Compatible with NiCd and NiMH batteries.
Weight: 2.5 lbs.
Dimensions: 10 x 6 x 4 inches.

Controls and Settings

The charger features a simple interface with an ON/OFF switch and LED indicators for charging status.

LED Indicators: Green light indicates fully charged, red light indicates charging in progress.

Connecting Devices

To charge a battery, simply insert it into the charger until it clicks into place.

Ensure the charger is unplugged before inserting or removing batteries.
Align the battery terminals with the charger contacts.
Plug the charger into a power outlet.

Tip: Always check for proper alignment to avoid damage.

Charging Batteries

Follow these steps to charge your Dewalt batteries effectively.

Insert the battery into the charger.
Check the LED indicator for charging status.
Remove the battery once fully charged.

WARNING! Do not leave batteries unattended while charging.

Safety Features

The DE9116 charger includes built-in safety mechanisms to prevent overheating and overcharging.

Care & Cleaning

Unplug the charger before cleaning. Use a dry cloth to wipe the exterior; do not use liquids.

CAUTION! Avoid exposing the charger to moisture.

Regulatory Information

This charger complies with all relevant safety standards and regulations. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Charger not working	No power supply	Check power outlet and connections.
Battery not charging	Improper connection	Ensure battery is seated correctly.
LED indicator not lit	Faulty charger	Contact customer service for support.
Overheating	Blocked ventilation	Ensure charger is in a well-ventilated area.

Reset: Unplug and replug the charger to reset.

Service: 1-800-433-9258; www.dewalt.com