Dewalt DE9135 Charger Manual

The Dewalt DE9135 is a high-performance charger designed for Dewalt 12V and 18V batteries. It features a compact design, fast charging capabilities, and built-in safety features to protect against overcharging and overheating. This manual provides essential information on features, installation, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating Instructions 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Fast charging capability, LED indicator lights, compact design, built-in safety features.

Feature	Description
Fast Charging	Charges batteries quickly to minimize downtime.
LED Indicator Lights	Shows charging status and battery health.
Compact Design	Easy to store and transport.
Safety Features	Prevents overcharging and overheating.

Installation

Unpack the charger and inspect for any damage. Place the charger on a stable surface away from moisture.

Connect the charger to a power outlet.
Ensure the battery is compatible with the charger.
Place the battery onto the charger, aligning the contacts.

WARNING! Do not expose the charger to rain or moisture.

First-Time Setup

Plug in the charger and ensure it is powered on. Follow the LED indicators for charging instructions.

Insert the battery into the charger.
Observe the LED indicator for charging status.
Remove the battery once fully charged.

CAUTION! Do not leave the battery on the charger for extended periods after it is fully charged.

Specifications

Input Voltage: 120V AC.
Output Voltage: 12V/18V DC.
Charging Time: Approximately 1 hour for most batteries.
Weight: 1.5 lbs.
Dimensions: 8 x 5 x 3 inches.
Compatibility: Dewalt 12V and 18V batteries.

Controls and Settings

The charger features a simple interface with an LED indicator to show charging status. No additional settings are required.

Connecting Devices

Ensure the charger is unplugged before connecting or disconnecting batteries.

Align the battery with the charger contacts.
Press down gently until the battery clicks into place.
Plug in the charger to start charging.

Tip: Always check compatibility before charging.

Operating Instructions

To charge a battery, simply place it on the charger and plug it in. The LED indicator will show the charging status.

Check the LED indicator for charging status.
Remove the battery once the indicator shows fully charged.

WARNING! Do not attempt to charge non-compatible batteries.

Safety Features

The charger includes built-in safety features to prevent overcharging and overheating, ensuring safe operation.

Care & Cleaning

Unplug the charger before cleaning. Use a dry cloth to clean the exterior; do not use liquids.

CAUTION! Avoid exposing the charger to moisture.

Regulatory Information

This charger complies with all applicable safety standards. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Charger not working	No power	Check power outlet and connections.
Battery not charging	Incompatible battery	Ensure battery is compatible with charger.
LED indicator not lit	Faulty charger	Contact customer service for assistance.

Reset: Unplug and replug the charger to reset.

Service: 1-800-433-9258; www.dewalt.com