Dewalt DW 733 Manual

The Dewalt DW 733 is a powerful portable planer designed for professional woodworkers and DIY enthusiasts. It features a 15-amp motor that delivers a smooth finish on various types of wood. The DW 733 is equipped with a 3-blade cutter head that provides a cutting width of 12 inches and a maximum depth of cut of 1/8 inch. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Planer 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 15-amp motor, 3-blade cutter head, adjustable depth control, and onboard storage for accessories.

Feature	Description
15-Amp Motor	Powerful motor for efficient planing
3-Blade Cutter Head	Provides a smooth finish and reduces snipe
Adjustable Depth Control	Allows for precise depth adjustments
Onboard Storage	Convenient storage for accessories and tools
Portable Design	Easy to transport and set up on job sites

Installation

Unpack and inspect the contents. Place the planer on a stable surface.

Ensure the planer is unplugged before installation.
Attach the dust collection system if available.
Adjust the height of the infeed and outfeed tables as needed.
Plug into a suitable power outlet.

WARNING! Always ensure the planer is stable and secure before use.

First-Time Setup

Power on the planer and familiarize yourself with the controls.

Set the desired depth of cut using the depth adjustment knob.
Ensure the blades are sharp and properly installed.
Run a test piece of wood to check settings.

CAUTION! Always wear safety goggles and ear protection when operating the planer.

Specifications

Motor Power: 15 amps.
Cutter Head Speed: 20,000 RPM.
Planing Width: 12 inches.
Maximum Depth of Cut: 1/8 inch.
Weight: 80 lbs.
Dust Port Diameter: 2-1/2 inches.
Dimensions: 25 x 20 x 18 inches.

Controls and Settings

Access the depth adjustment knob and power switch located on the front panel. The planer also features a safety lock to prevent accidental start-up.

Tip: Always check the blade condition before use to ensure optimal performance.

Connecting Devices

Ensure all connections are secure before operating the planer. Use the dust collection port to connect to a vacuum system for cleaner operation.

Turn off the planer before connecting the dust collection system.
Ensure the dust port is securely attached.

Tip: Regularly check for clogs in the dust collection system.

Operating the Planer

Follow these steps to operate the planer effectively:

Adjust the depth of cut as needed.
Feed the wood slowly and steadily into the planer.
Monitor the output for a smooth finish.

WARNING! Do not force the wood through the planer; let the machine do the work.

Maintenance

Regular maintenance is essential for optimal performance. Clean the planer after each use and check the blades for wear.

CAUTION! Always unplug the planer before performing maintenance.

Safety Information

Always follow safety guidelines when operating the planer. Wear appropriate personal protective equipment and keep hands away from moving parts.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Planer won't start	Power supply issue	Check power cord and outlet.
Uneven cut	Blades dull or misaligned	Sharpen or replace blades.
Excessive noise	Loose parts	Tighten all screws and bolts.
Wood jams	Incorrect feeding	Feed wood slowly and steadily.

Service: For further assistance, contact Dewalt customer service.