Dewalt DW073KD Manual

The Dewalt DW073KD is a high-quality laser level designed for precision and ease of use in various construction and renovation projects. This manual provides essential information on safety, features, setup, operation, and troubleshooting to ensure optimal performance of your laser level.

Features at a Glance

Key components: Laser level, tripod, carrying case, user manual, and battery pack.

Feature	Description
Self-Leveling	Automatically levels within 4 degrees.
Durable Design	Built to withstand tough job site conditions.
Long Range	Effective range of up to 200 feet.
Battery Life	Extended battery life for prolonged use.
Multiple Modes	Horizontal, vertical, and cross-line modes available.

Installation

Unpack and inspect contents. Set up on a stable surface or tripod.

1. Attach the laser level to the tripod securely.
2. Ensure the area is clear of obstacles for accurate leveling.
3. Power on the device and allow it to self-level.

WARNING! Ensure the laser is not pointed at anyone's eyes during operation.

First-Time Setup

Power on the laser level; follow on-screen prompts if available.

1. Set the desired mode: horizontal, vertical, or cross-line.
2. Adjust the height of the tripod as needed.
3. Check the battery level before starting work.

CAUTION! Ensure the tripod is stable to avoid tipping.

Specifications

• Laser Type: Class II laser.
• Range: Up to 200 feet.
• Accuracy: ±1/8 inch at 100 feet.
• Power Source: 4 AA batteries.
• Operating Temperature: 14°F to 122°F (-10°C to 50°C).
• Weight: 5.5 lbs.
• Dimensions: 10 x 8 x 6 inches.

Controls and Settings

Access settings via the control panel on the device. Key controls include power, mode selection, and adjustment knobs.

Remote: Optional remote control for convenience.

Adjust laser brightness and mode settings as needed for optimal visibility.

Connecting Devices

Ensure all devices are compatible with the laser level.

1. Connect to a compatible tripod or mounting system.
2. Ensure all connections are secure before use.

Tip: Use a stable surface for best results.

Operating the Laser Level

Follow these steps to operate the laser level effectively.

1. Power on the device and allow it to self-level.
2. Select the desired mode for your project.
3. Use the laser line as a reference for alignment.
4. Adjust the height and angle as necessary.

WARNING! Do not look directly into the laser beam.

Accessibility Features

Features include audible alerts for leveling and visual indicators for mode selection.

Care & Cleaning

Unplug before cleaning. Use a soft, dry cloth to clean the exterior.

CAUTION! Avoid using liquids or abrasive materials.

Regulatory Information

This device complies with FCC regulations and safety standards. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Laser not leveling	Uneven surface	Ensure the tripod is on a stable, flat surface.
No power	Dead batteries	Replace batteries with fresh ones.
Laser line faint	Low battery	Replace batteries or recharge if applicable.
Device not responding	Software issue	Reset the device and try again.

Reset: Follow the manufacturer's instructions for resetting the device.

Service: Contact Dewalt customer service for further assistance.