Dewalt DW090 Builders Level Manual

The Dewalt DW090 Builders Level is a precision leveling instrument designed for construction and surveying applications. It features a durable design, easy-to-read horizontal and vertical crosshairs, and a built-in compensator for accurate leveling. This manual provides essential information on features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using the Level 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Durable housing, easy-to-read crosshairs, built-in compensator, adjustable leveling screws, and a sturdy tripod mount.

Feature	Description
Durable housing	Resistant to dust and moisture for outdoor use
Built-in compensator	Automatically adjusts for accurate leveling
Adjustable leveling screws	For precise height adjustments
Tripod mount	Compatible with standard tripods for stability

Installation

Unpack and inspect the level. Mount on a stable tripod for accurate readings.

Attach the level to the tripod securely.
Ensure the tripod is stable and level before use.
Adjust the leveling screws to achieve a horizontal position.

WARNING! Ensure all connections are secure to avoid accidents.

First-Time Setup

Power on the level; ensure it is calibrated before use.

Check the bubble level to ensure it is centered.
Adjust the leveling screws as necessary.
Test the level on a known flat surface to confirm accuracy.

CAUTION! Handle with care to maintain calibration.

Specifications

Level Type: Builders Level.
Accuracy: ±1/16 inch at 100 feet.
Range: Up to 1000 feet.
Weight: 5.5 lbs.
Tripod Compatibility: Standard 5/8-11 thread.
Operating Temperature: 14°F to 122°F (-10°C to 50°C).

Controls and Settings

Access settings via the adjustment knobs located on the side of the level. Ensure the compensator is engaged for accurate readings.

Connecting Devices

Ensure the level is securely mounted on a tripod before use.

Turn off the level before making any adjustments.
Ensure all connections are tight and secure.

Tip: Always check the level's calibration after connecting to a tripod.

Using the Level

To use the level, follow these steps:

Set the level on a stable surface or tripod.
Look through the eyepiece to align the crosshairs with your target.
Adjust the leveling screws as needed to maintain accuracy.

WARNING! Do not look directly at the sun through the level.

Maintenance

Regularly clean the lens and housing. Store in a dry place when not in use.

CAUTION! Avoid exposing the level to extreme temperatures or moisture.

Regulatory Information

This product complies with applicable regulations for safety and performance. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Level not accurate	Calibration issue	Recalibrate the level according to instructions.
Bubble level not centered	Uneven surface	Adjust the tripod legs for stability.
Difficulty seeing crosshairs	Dirty lens	Clean the lens with a soft cloth.

Reset: Follow the calibration procedure to reset the level.

Service: For assistance, contact Dewalt customer service.