Dewalt DW235G Drill Manual

The Dewalt DW235G is a powerful and versatile drill designed for both professional and DIY use. With a 7.8 Amp motor, it delivers high performance for various drilling and fastening applications. This manual covers essential safety information, features, installation, operation, and troubleshooting tips to help you get the most out of your drill.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Drill 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key features include: 7.8 Amp motor, variable speed control, 1/2-inch keyless chuck, and an ergonomic design for comfort during use.

Feature	Description
7.8 Amp Motor	Provides high performance for tough applications
Variable Speed Control	Allows for precise drilling and fastening
1/2-inch Keyless Chuck	Easy bit changes without tools
Ergonomic Design	Comfortable grip for extended use
Built-in LED Light	Illuminates work area for better visibility

Installation

Before using the drill, ensure it is properly assembled and all components are securely attached.

Check that the drill is unplugged before assembly.
Attach the desired drill bit into the keyless chuck.
Ensure the chuck is tightened securely.
Plug the drill into a power outlet.

WARNING! Always wear safety goggles when operating the drill.

First-Time Setup

Power on the drill and familiarize yourself with its controls.

Adjust the speed setting according to your application.
Practice drilling on scrap material to get a feel for the tool.
Ensure the drill is set to the correct mode for your task.

CAUTION! Always keep hands clear of the drill bit while operating.

Specifications

Motor Power: 7.8 Amps.
Chuck Size: 1/2 inch keyless.
Speed Range: 0-1,200 RPM.
Weight: 4.5 lbs.
Dimensions: 12 x 10 x 4 inches.
Power Source: Corded electric.
Warranty: 3 years limited.

Controls and Settings

The drill features a variable speed trigger, forward/reverse switch, and a lock-on button for continuous operation.

Speed Control: Adjust the speed by varying the pressure on the trigger.

Forward/Reverse Switch: Use to change the direction of rotation.

Connecting Accessories

Ensure the drill is unplugged before connecting any accessories.

Choose the appropriate drill bit for your task.
Insert the bit into the chuck and tighten securely.
Plug the drill into a power source before use.

Tip: Always use the correct bit for the material you are drilling.

Operating the Drill

Follow these steps to operate the drill effectively.

Hold the drill firmly with both hands.
Position the drill bit at the desired location.
Press the trigger to start drilling.
Release the trigger to stop.

WARNING! Do not force the drill; let the tool do the work.

Maintenance

Regular maintenance will ensure the longevity of your drill.

Keep the drill clean and free of debris.
Inspect the power cord for damage.
Lubricate moving parts as needed.

Safety Information

Always follow safety precautions when using the drill.

Wear safety goggles and a dust mask.
Keep hands away from moving parts.
Do not operate in wet conditions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Drill won't start	Power source issue	Check power outlet and cord connections.
Bit won't rotate	Chuck is loose	Tighten the chuck securely.
Excessive vibration	Improper bit	Use the correct bit for the material.
Overheating	Continuous use	Allow the drill to cool down before resuming.

Reset: Unplug and re-plug the drill to reset.