Dewalt DW704 Manual

The Dewalt DW704 is a powerful 12-inch miter saw designed for precision and durability. It features a robust motor, adjustable miter and bevel settings, and a laser guide for accurate cuts. Ideal for both professional contractors and DIY enthusiasts, the DW704 excels in making crosscuts, bevel cuts, and compound miter cuts. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Saw 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 12-inch blade, adjustable miter and bevel angles, laser guide, dust collection port, and ergonomic handle.

Feature	Description
12-inch Blade	For making precise cuts in various materials
Adjustable Miter Angles	Allows for cuts at various angles up to 50 degrees
Laser Guide	Helps in aligning cuts accurately
Dust Collection Port	Connects to vacuum for cleaner workspace
Ergonomic Handle	Provides comfort during extended use

Installation

Unpack and inspect the saw. Place it on a stable work surface.

Secure the saw to a workbench using clamps.
Connect the dust collection system if available.
Ensure the power cord is properly routed and not a tripping hazard.

WARNING! Always ensure the saw is unplugged when making adjustments or changing blades.

First-Time Setup

Power on the saw; follow the setup instructions in the manual.

Adjust the miter angle to 0 degrees for crosscuts.
Set the bevel angle if required for angled cuts.
Test the laser alignment before making cuts.

CAUTION! Ensure the saw is stable before making any cuts.

Specifications

Blade Size: 12 inches.
Motor Power: 15 amps.
Miter Angle Range: 0 to 50 degrees.
Bevel Angle Range: 0 to 45 degrees.
Weight: 45 lbs.
Dust Collection: Yes, with port.
Laser Guide: Yes, included.

Controls and Settings

Access miter and bevel adjustments using the knobs located on the saw. The laser guide can be activated via a switch on the handle.

Safety Features: Blade guard, electric brake, and safety switch to prevent accidental starts.

Connecting Devices

Ensure the saw is unplugged before connecting any accessories.

Connect the dust collection system to the port.
Use compatible blades for different materials.

Tip: Always use the correct blade for the material being cut.

Operating the Saw

Follow these steps for safe operation:

Ensure the workpiece is secured before cutting.
Align the blade with the cut line using the laser guide.
Power on the saw and make the cut smoothly.
Turn off the saw and wait for the blade to stop before removing the workpiece.

WARNING! Never reach over the blade while it is in motion.

Maintenance

Regular maintenance is essential for optimal performance.

Keep the saw clean and free of debris.
Check and replace the blade as needed.
Inspect the power cord for damage.

Safety Information

Always wear safety goggles and hearing protection when operating the saw. Follow all safety guidelines outlined in the manual.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Saw does not start	Power cord issue	Check power connection and cord for damage.
Blade not cutting	Dull blade	Replace with a new blade.
Excessive vibration	Improperly mounted blade	Check blade installation and tighten.
Laser not working	Battery issue	Replace battery in the laser guide.

Service: Contact Dewalt customer service for assistance.