Dewalt DW705 Owners Manual

The Dewalt DW705 is a powerful 12-inch compound miter saw designed for precision cutting in a variety of materials. It features a robust motor, adjustable miter and bevel settings, and a durable construction that ensures longevity and reliability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Saw 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 12-inch blade, adjustable miter angles, laser guide, dust collection port, and ergonomic handle.

Feature	Description
12-inch Blade	For cutting a variety of materials with precision.
Adjustable Miter Angles	Allows for accurate angled cuts up to 50 degrees.
Laser Guide	Helps in aligning cuts for enhanced accuracy.
Dust Collection Port	Minimizes debris and keeps workspace clean.
Ergonomic Handle	Provides comfort during extended use.

Installation

Unpack and inspect contents. Place on a stable work surface.

Ensure the saw is on a level surface.
Secure the saw to prevent movement during operation.
Connect the dust collection system if available.
Plug into a power source.

WARNING! Always ensure the saw is unplugged when making adjustments or changing blades.

First-Time Setup

Power on the saw; follow the setup instructions provided in the manual.

Adjust the miter angle to 0 degrees for straight cuts.
Set the bevel angle as needed for your project.
Test the laser guide alignment before cutting.
Ensure all safety features are operational.

CAUTION! Always wear appropriate safety gear when operating the saw.

Specifications

Blade Size: 12 inches.
Motor Power: 15 amps.
Miter Capacity: 0 to 50 degrees left and right.
Bevel Capacity: 0 to 45 degrees.
Weight: 50 lbs.
Dust Collection: Yes, with port.
Laser Guide: Yes, included.

Controls and Settings

Access the miter and bevel adjustments using the knobs located on the saw's base. The laser guide can be activated via a switch on the handle.

Safety Features: Includes blade guard and electric brake for immediate stopping.

Connecting Devices

Ensure the saw is properly connected to a power source. Use the dust collection port to connect to a vacuum system for cleaner operation.

Turn off the saw before connecting any devices.
Match the dust collection hose to the port.

Tip: Always check connections before starting the saw.

Operating the Saw

Follow these steps for safe operation:

Adjust the miter and bevel settings as needed.
Place the material securely against the fence.
Power on the saw and make the cut.
Always keep hands clear of the blade.

WARNING! Never reach over the blade while it is in motion.

Maintenance

Regular maintenance is essential for optimal performance. Clean the saw after each use and check for any loose parts.

CAUTION! Always unplug the saw before performing maintenance.

Safety Information

Always wear safety goggles and hearing protection when operating the saw. Follow all safety guidelines outlined in the manual.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Saw does not start	Power source issue	Check power cord and outlet.
Blade not spinning	Motor issue	Inspect motor and connections.
Inaccurate cuts	Misalignment	Check and adjust miter and bevel settings.
Excessive vibration	Loose parts	Tighten all screws and bolts.

Service: For further assistance, contact Dewalt customer service.