Dewalt DW706 Miter Saw Manual

The Dewalt DW706 is a powerful 12-inch double bevel sliding compound miter saw designed for precision and versatility in cutting various materials. It features a robust motor, adjustable miter and bevel settings, and a laser guide for enhanced accuracy. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Miter Saw 8. Maintenance and Care 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 12-inch blade, dual bevel capability, adjustable miter angles, laser guide, and dust collection system.

Feature	Description
12-inch Blade	For cutting through a variety of materials with precision.
Dual Bevel Capability	Allows for angled cuts in both directions.
Adjustable Miter Angles	Customizable settings for various cutting needs.
Laser Guide	Helps ensure accurate cuts.
Dust Collection System	Minimizes debris for a cleaner workspace.

Installation

Unpack and inspect contents. Place on a stable work surface.

Secure the saw to a workbench using clamps.
Connect to a power source; ensure proper voltage.
Attach the dust collection bag if desired.

WARNING! Ensure the saw is securely mounted to avoid accidents.

First-Time Setup

Power on the saw; follow setup instructions.

Adjust the miter angle to the desired setting.
Set the bevel angle as needed for your cuts.
Test the laser alignment before cutting.

CAUTION! Always wear safety gear when operating the saw.

Specifications

Blade Size: 12 inches.
Motor Power: 15 amps.
Bevel Capacity: 0° to 48° left and right.
Miter Capacity: 0° to 60° left and 0° to 50° right.
Weight: 56 lbs.
Dust Collection: Yes, with bag.
Laser Guide: Yes, included.

Controls and Settings

Access the miter and bevel adjustments easily located on the saw.

Controls: Miter adjustment knob, bevel adjustment lever, and power switch.

Ensure all settings are locked before operating the saw.

Connecting Devices

Ensure the saw is connected to a suitable power outlet.

Use a heavy-duty extension cord if necessary.
Ensure the power switch is off before plugging in.

Tip: Always check the power source compatibility.

Operating the Miter Saw

Follow these steps for safe operation:

Adjust the miter and bevel settings as needed.
Place the material securely against the fence.
Power on the saw and allow it to reach full speed.
Make the cut smoothly and steadily.
Turn off the saw and wait for the blade to stop before removing the material.

WARNING! Keep hands clear of the blade at all times.

Maintenance and Care

Regular maintenance ensures optimal performance.

Keep the blade clean and sharp.
Check and empty the dust collection bag regularly.
Inspect power cords for damage.

Safety Information

Always follow safety guidelines when operating the miter saw.

Wear safety goggles and hearing protection.
Do not wear loose clothing or jewelry.
Keep the work area clean and well-lit.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Blade does not spin	Power issue	Check power source and connections.
Inaccurate cuts	Misalignment	Check and adjust miter and bevel settings.
Excessive vibration	Loose parts	Tighten all screws and bolts.
Dust collection ineffective	Clogged bag	Empty and clean the dust collection bag.

Reset: Ensure all settings are correct before operating.

Service: Contact Dewalt customer service for assistance.