Dewalt DW707 LX Manual

The Dewalt DW707 LX is a powerful miter saw designed for precision cutting and versatility. It features a robust motor, adjustable miter angles, and a laser guide for enhanced accuracy. This manual provides essential information on safety, features, setup, operation, and maintenance to ensure optimal performance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Miter Saw 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: Powerful motor, adjustable miter angles, laser guide, dust collection port, and ergonomic handle.

Feature	Description
Powerful motor	Delivers high performance for tough cutting tasks
Adjustable miter angles	Allows for precise angle cuts up to 45 degrees
Laser guide	Helps ensure accurate cuts
Dust collection port	Minimizes debris for a cleaner workspace
Ergonomic handle	Provides comfort during extended use

Installation

Unpack and inspect contents. Place the miter saw on a stable work surface.

Ensure the saw is securely mounted if using a stand.
Connect the dust collection system if available.
Plug into a power source.

WARNING! Ensure all connections are secure and the area is clear of obstructions.

First-Time Setup

Power on the saw; follow the setup instructions.

Adjust the miter angle to the desired position.
Set the bevel angle if necessary.
Check the blade alignment and adjust if needed.

CAUTION! Always wear safety gear when operating the saw.

Specifications

Motor Power: 15 Amps.
Blade Size: 12 inches.
Miter Angle Range: 0 to 45 degrees.
Bevel Angle Range: 0 to 45 degrees.
Weight: 50 lbs.
Dust Collection: Yes, with port.
Laser Guide: Yes.

Controls and Settings

Access settings via the adjustment knobs for miter and bevel angles. The power switch is located on the front panel.

Safety Features: Blade guard, electric brake, and safety lock.

Connecting Devices

Ensure the saw is unplugged before making any connections.

Connect the dust collection system to the port.
Ensure all cables are secured and not in the way of the saw's operation.

Tip: Keep the workspace organized to avoid accidents.

Operating the Miter Saw

Follow these steps for safe operation:

Adjust the miter and bevel angles as needed.
Place the material securely against the fence.
Power on the saw and make the cut.
Always wait for the blade to stop before removing the material.

WARNING! Keep hands clear of the blade at all times.

Maintenance

Regular maintenance is essential for optimal performance.

Keep the blade clean and sharp.
Check and tighten all screws and bolts.
Inspect the power cord for damage.

Safety Information

Always follow safety guidelines when operating the miter saw.

Wear safety goggles and hearing protection.
Do not operate the saw without the blade guard in place.
Keep the work area clean and well-lit.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Blade not spinning	Power issue	Check power source and connections.
Inaccurate cuts	Misalignment	Check and adjust blade alignment.
Excessive vibration	Loose parts	Tighten screws and bolts.
Dust collection ineffective	Clogged port	Clear dust collection port.

Reset: Refer to the manual for reset instructions if available.

Service: Contact Dewalt customer service for support.