Dewalt DW707 Manual

The Dewalt DW707 is a powerful 12-inch double bevel sliding compound miter saw designed for precision cutting in a variety of materials. It features a robust motor, adjustable bevel settings, and a large cutting capacity, making it ideal for both professional contractors and DIY enthusiasts. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 12-inch blade, dual bevel capability, laser guide, adjustable miter settings, and a sturdy base for stability.

Feature	Description
12-inch Blade	For cutting through a variety of materials with precision.
Dual Bevel Capability	Allows for angled cuts in both directions.
Laser Guide	Helps ensure accurate cuts by projecting a line on the workpiece.
Adjustable Miter Settings	Offers a range of angles for versatile cutting options.
Sturdy Base	Provides stability during operation.

Installation

Unpack and inspect contents. Place the saw on a stable work surface.

1. Attach the saw to a workbench or stand for stability.
2. Ensure the power cord is properly connected to a power source.
3. Adjust the miter and bevel settings as needed.

WARNING! Ensure all connections are secure before operating the saw.

First-Time Setup

Power on the saw and familiarize yourself with the controls.

1. Set the blade height and angle according to your cutting needs.
2. Test the laser guide alignment before making cuts.
3. Practice making cuts on scrap material to ensure settings are correct.

CAUTION! Always wear appropriate safety gear when operating the saw.

Specifications

• Blade Size: 12 inches.
• Motor Power: 15 Amp.
• Bevel Capacity: 0 to 48 degrees.
• Miter Capacity: 0 to 60 degrees.
• Weight: 50 lbs.
• Dimensions: 30 x 22 x 18 inches.
• Power Source: 120V AC.

Controls and Settings

Access the miter and bevel controls located on the front of the saw. The laser guide can be activated via a switch on the side.

Safety Features: Blade guard, electric brake, and safety switch to prevent accidental starts.

Connecting Devices

Ensure the saw is unplugged before making any adjustments or connections.

1. Connect the saw to a power outlet using the provided power cord.
2. Use a dust collection system for cleaner operation.

Tip: Always check for loose connections before starting the saw.

Operating the Saw

Follow these steps for safe operation:

1. Adjust the blade height and angle as needed.
2. Position the material securely against the fence.
3. Power on the saw and make the cut.
4. Always wait for the blade to stop before removing the material.

WARNING! Keep hands away from the blade during operation.

Safety Features

The Dewalt DW707 includes several safety features to protect the user:

• Blade guard to prevent accidental contact.
• Electric brake to stop the blade quickly.
• Safety switch to prevent unintentional starts.

Care & Cleaning

Unplug the saw before cleaning. Use a dry cloth to wipe down the exterior; avoid using liquids.

CAUTION! Do not allow dust to accumulate on the saw; clean regularly for optimal performance.

Regulatory Information

This product complies with all applicable safety standards and regulations. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Blade not spinning	Power issue	Check power connection and switch.
Laser guide not functioning	Battery issue	Replace battery or check connections.
Inaccurate cuts	Misalignment	Check and adjust miter and bevel settings.
Excessive vibration	Loose parts	Tighten all screws and bolts.

Reset: Refer to the user manual for reset instructions if available.

Service: For service inquiries, contact Dewalt customer support.