Dewalt DW708 Instruction Manual

The Dewalt DW708 is a powerful 12-inch double bevel sliding compound miter saw designed for precision and versatility. It features a robust motor, dual bevel capability, and an adjustable miter system, making it ideal for both professional contractors and DIY enthusiasts. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Saw 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 12-inch blade, dual bevel capability, adjustable miter angles, laser guide, and dust collection system.

Feature	Description
12-inch Blade	For cutting a variety of materials with precision.
Dual Bevel Capability	Allows for angled cuts in both directions.
Adjustable Miter Angles	Easy adjustments for various cutting angles.
Laser Guide	Helps ensure accurate cuts.
Dust Collection System	Minimizes debris for a cleaner workspace.

Installation

Unpack and inspect contents. Place the saw on a stable work surface.

Attach the saw to a workbench or stand for stability.
Ensure the power cord is properly connected to a power source.
Adjust the miter and bevel settings as needed.

WARNING! Ensure all safety guards are in place before operating the saw.

First-Time Setup

Power on the saw; follow the setup instructions in the manual.

Check blade alignment and adjust if necessary.
Set the desired miter and bevel angles for your first cut.
Test the laser guide to ensure accuracy.

CAUTION! Always wear safety goggles when operating the saw.

Specifications

Blade Size: 12 inches.
Motor Power: 15 amps.
Bevel Capacity: 0-48 degrees left and right.
Miter Capacity: 0-60 degrees left and 0-50 degrees right.
Weight: 56 lbs.
Dust Port: 2-1/2 inches.
Laser Guide: Yes.

Controls and Settings

Access the miter and bevel controls on the front panel. Ensure the saw is powered off before making adjustments.

Safety Features: Blade guard, electric brake, and safety switch.

Connecting Devices

Ensure the saw is unplugged before connecting any accessories.

Connect the dust collection system to the dust port.
Attach any additional accessories as per the manual instructions.

Tip: Always check compatibility of accessories with the DW708 model.

Operating the Saw

Follow the instructions for making cuts safely and accurately.

Adjust the miter and bevel settings as required.
Power on the saw and allow it to reach full speed before cutting.
Make the cut using steady pressure.

WARNING! Keep hands clear of the blade at all times.

Maintenance

Regular maintenance is essential for optimal performance.

Keep the blade clean and sharp.
Inspect the power cord for damage.
Check and empty the dust collection system regularly.

Safety Information

Always follow safety guidelines to prevent accidents.

Wear appropriate personal protective equipment (PPE).
Ensure the work area is clean and free of hazards.
Do not operate the saw under the influence of drugs or alcohol.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Blade not spinning	Power issue	Check power connection and switch.
Inaccurate cuts	Misalignment	Check blade alignment and adjust.
Excessive vibration	Loose parts	Tighten all screws and bolts.
Dust not collecting	Clogged port	Inspect and clean dust port.

Reset: Refer to the manual for resetting instructions if applicable.