Dewalt DW708 Owners Manual

The Dewalt DW708 is a powerful 12-inch double bevel sliding compound miter saw designed for precision and versatility. It features a robust motor, adjustable bevel settings, and an innovative sliding mechanism that allows for smooth and accurate cuts. Ideal for both professional contractors and DIY enthusiasts, the DW708 is equipped with a laser guide for enhanced accuracy and a dust collection system to keep your workspace clean. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Saw 8. Maintenance and Care 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 12-inch blade, double bevel capability, sliding mechanism, laser guide, dust collection port.

Feature	Description
12-inch Blade	For cutting a variety of materials with precision.
Double Bevel	Allows for bevel cuts in both directions.
Sliding Mechanism	Increases cutting capacity for wider materials.
Laser Guide	Helps ensure accurate cuts.
Dust Collection Port	Connects to vacuum for cleaner workspace.

Installation

Unpack the saw and inspect for any damage. Place on a stable work surface.

Attach the saw to a workbench or stand for stability.
Connect the dust collection system if available.
Ensure the power cord is safely routed away from cutting area.

WARNING! Always ensure the saw is unplugged when making adjustments or changing blades.

First-Time Setup

Power on the saw and familiarize yourself with the controls.

Adjust the bevel and miter settings as needed.
Check the blade alignment and make necessary adjustments.
Test the laser guide for accuracy.

CAUTION! Always wear appropriate safety gear when operating the saw.

Specifications

Blade Size: 12 inches.
Motor Power: 15 amps.
Bevel Capacity: 0-48 degrees left and right.
Miter Capacity: 0-60 degrees left, 0-50 degrees right.
Weight: 56 lbs.
Dust Collection: 1-1/4 inch port.
Laser Guide: Integrated for precision cutting.

Controls and Settings

Access the miter and bevel adjustments on the front panel. The saw features a power switch, blade guard, and depth adjustment lever.

Safety Features: Blade guard, electric brake, and trigger lock.

Connecting Devices

Ensure the saw is unplugged before making any connections.

Connect the dust collection system to the port.
Use appropriate extension cords for power supply.

Tip: Always check connections before powering on the saw.

Operating the Saw

Follow these steps for safe operation:

Adjust the miter and bevel settings as required.
Place the material securely against the fence.
Power on the saw and make the cut.
Always wait for the blade to stop before removing material.

WARNING! Keep hands away from the blade at all times.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Keep the saw clean and free of debris.
Inspect the blade regularly for wear and replace as necessary.
Lubricate moving parts as per the manufacturer's guidelines.

CAUTION! Always unplug the saw before performing maintenance.

Safety Information

Read all safety instructions before operating the saw. Always wear safety glasses and hearing protection.

WARNING! Failure to follow safety instructions may result in serious injury.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Saw does not start	Power supply issue	Check power cord and outlet.
Blade not spinning	Motor issue	Inspect motor and connections.
Inaccurate cuts	Misalignment	Check and adjust blade alignment.
Excessive vibration	Loose parts	Tighten all screws and bolts.

Reset: Refer to the manual for reset procedures if applicable.

Service: Contact Dewalt customer service for assistance.