Dewalt DW713 Miter Saw Manual

The Dewalt DW713 is a powerful 10-inch compound miter saw designed for precision and durability. It features a 15-amp motor that delivers a no-load speed of 5,000 RPM, allowing for efficient cutting of various materials. The saw includes a stainless steel miter plate with 11 positive stops, an adjustable bevel, and a lightweight design for easy portability. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Miter Saw 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 10-inch blade, adjustable bevel, miter detents, laser guide, dust collection port.

Feature	Description
15-amp motor	Provides high power for cutting through tough materials
Stainless steel miter plate	Durable and resistant to corrosion
11 positive miter stops	Allows for quick adjustments to common angles
Laser guide	Helps ensure accurate cuts
Dust collection port	Connects to vacuum for cleaner workspace

Installation

Unpack and inspect contents. Ensure a stable work surface.

Attach the saw to a workbench or stand for stability.
Connect the power cord to a suitable outlet.
Ensure the blade is properly installed and tightened.
Check the alignment of the laser guide.

WARNING! Always use safety gear when operating the saw. Ensure all connections are secure.

First-Time Setup

Power on the saw; follow the setup instructions.

Adjust the miter angle to the desired position.
Set the bevel angle if needed.
Test the laser alignment with the blade.
Perform a test cut on scrap material.

CAUTION! Ensure the saw is unplugged when making adjustments.

Specifications

Blade Size: 10 inches.
Motor: 15-amp.
No-load Speed: 5,000 RPM.
Miter Capacity: 0° to 50° left and right.
Bevel Capacity: 0° to 45° left.
Weight: 35 lbs.
Dust Collection: 1-1/4 inch port.

Controls and Settings

Access miter and bevel adjustments on the saw's front panel. Use the laser guide for precision cutting.

Safety Features: Blade guard, electric brake, and trigger lock.

Connecting Devices

Ensure the saw is unplugged before making any connections.

Connect the dust collection system if available.
Ensure the power cord is properly connected to the outlet.
Check that all safety features are functioning before use.

Tip: Keep the workspace clear of debris for safety.

Operating the Miter Saw

Follow these steps for safe operation:

Adjust the miter and bevel settings as needed.
Place the material securely against the fence.
Power on the saw and make the cut.
Always keep hands clear of the blade.

WARNING! Never reach over the blade while it is in motion.

Maintenance

Regular maintenance is essential for optimal performance.

Keep the blade clean and sharp.
Inspect power cord for damage.
Check and empty the dust collection bag regularly.
Lubricate moving parts as needed.

CAUTION! Unplug the saw before performing maintenance.

Safety Information

Always wear safety glasses and hearing protection when operating the saw. Follow all safety guidelines provided in the manual.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Blade not spinning	Power issue	Check power cord and outlet.
Inaccurate cuts	Misalignment	Check miter and bevel settings.
Excessive vibration	Blade issue	Ensure blade is properly installed and balanced.
Dust not collecting	Clogged port	Check and clear dust collection port.

Reset: Unplug and plug back in to reset the saw.

Service: For support, contact Dewalt customer service.