Dewalt DW716 Miter Saw Manual

The Dewalt DW716 is a 12-inch double bevel compound miter saw designed for precision and versatility in cutting. It features a powerful motor, adjustable miter and bevel settings, and a durable design suitable for both professional and DIY use. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Miter Saw 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 12-inch blade, double bevel capability, laser guide, adjustable miter angles, and a sturdy base.

Feature	Description
12-inch Blade	For cutting a variety of materials with precision.
Double Bevel	Allows for bevel cuts in both directions.
Laser Guide	Helps in aligning cuts accurately.
Adjustable Miter Angles	For precise angle cuts from 0 to 50 degrees.
Sturdy Base	Provides stability during operation.

Installation

Unpack and inspect contents. Place on a stable work surface.

Attach the saw to a workbench or stand for stability.
Ensure the power cord is properly connected to a power source.
Check that all safety features are functioning correctly.

WARNING! Ensure the saw is securely mounted to prevent accidents.

First-Time Setup

Power on the saw; follow the setup instructions in the manual.

Adjust the miter angle to 0 degrees for initial use.
Set the bevel angle as needed for your project.
Test the laser guide alignment before making cuts.

CAUTION! Always wear safety gear when operating the saw.

Specifications

Blade Size: 12 inches.
Motor Power: 15 amps.
Bevel Capacity: 0 to 48 degrees left and right.
Miter Capacity: 0 to 50 degrees left and right.
Weight: 50 lbs.
Laser Guide: Included for precision cutting.
Power Source: 120V AC.

Controls and Settings

Access miter and bevel adjustments via the control knobs located on the saw.

Safety Features: Blade guard, electric brake, and safety switch.

Connecting Devices

Ensure the saw is unplugged before making any adjustments or changes.

Connect to a power source using the provided power cord.
Use appropriate extension cords if necessary, rated for the saw's power.

Tip: Always check connections before operating the saw.

Operating the Miter Saw

Follow these steps for safe operation:

Adjust the miter and bevel settings as needed.
Place the material securely against the fence.
Power on the saw and make the cut.
Always wait for the blade to stop before removing the material.

WARNING! Keep hands clear of the blade at all times.

Safety Features

The Dewalt DW716 includes several safety features to protect the user:

Blade guard to prevent accidental contact.
Electric brake to stop the blade quickly.
Safety switch to prevent accidental start-up.

Care & Cleaning

Unplug the saw before cleaning. Use a dry cloth to wipe down the exterior.

CAUTION! Do not use liquids or solvents on the saw.

Regulatory Information

This product complies with all applicable safety standards and regulations. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Blade not spinning	Power issue	Check power connection and switch.
Inaccurate cuts	Misalignment	Adjust miter and bevel settings.
Excessive vibration	Loose parts	Tighten all screws and bolts.
Overheating	Continuous use	Allow the saw to cool down.

Reset: Refer to the manual for reset instructions if available.

Service: For service inquiries, contact Dewalt customer support.