Dewalt DW717 Miter Saw Manual

The Dewalt DW717 is a powerful 10-inch dual bevel sliding compound miter saw designed for precision and versatility in cutting. It features a high-performance motor, adjustable miter and bevel settings, and a durable construction that ensures longevity. This manual provides essential information on safety, features, setup, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Miter Saw 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Dual bevel capability, sliding feature for wider cuts, adjustable miter angles, and a laser guide for precision cutting.

Feature	Description
Dual Bevel	Allows for angled cuts in both directions.
Sliding Mechanism	Increases cutting capacity for wider materials.
Laser Guide	Helps ensure accurate cuts.
Adjustable Miter Angles	Provides flexibility for various cutting needs.
Dust Collection Port	Connects to vacuum for cleaner workspace.

Installation

Unpack and inspect the saw. Place it on a stable work surface.

Ensure the area is clear of obstructions.
Secure the saw to the workbench using clamps if necessary.
Connect the power cord to a suitable outlet.

WARNING! Always ensure the saw is unplugged when making adjustments or changing blades.

First-Time Setup

Power on the saw and familiarize yourself with the controls.

Adjust the miter and bevel settings as needed.
Test the laser guide alignment before cutting.
Ensure the blade is sharp and properly installed.

CAUTION! Always wear appropriate safety gear when operating the saw.

Specifications

Blade Size: 10 inches.
Motor Power: 15 amps.
Bevel Capacity: 0° to 48° left and right.
Miter Capacity: 0° to 60° left and 0° to 50° right.
Weight: Approximately 50 lbs.
Dust Collection: 1-1/4 inch vacuum port.

Controls and Settings

Access the miter and bevel adjustments using the knobs located on the front of the saw.

Safety Features: Blade guard, electric brake, and safety switch.

Connecting Devices

No external devices are required for operation; however, a vacuum can be connected for dust collection.

Ensure the saw is unplugged before connecting any devices.
Connect the vacuum hose to the dust collection port.

Tip: Regularly check and clean the dust collection system for optimal performance.

Operating the Miter Saw

Follow these steps for safe operation:

Adjust the miter and bevel angles as needed.
Place the material securely against the fence.
Power on the saw and make the cut.
Always wait for the blade to stop before removing the material.

WARNING! Keep hands away from the blade while cutting.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Keep the saw clean and free of debris.
Inspect the blade regularly for wear and replace as needed.
Lubricate moving parts as per the manufacturer's recommendations.

CAUTION! Always unplug the saw before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Blade not spinning	Power issue	Check power connection; ensure switch is on.
Inaccurate cuts	Misalignment	Check and adjust miter and bevel settings.
Excessive vibration	Worn blade	Inspect blade; replace if necessary.
Dust collection ineffective	Clogged port	Check and clear dust collection system.

Service: For further assistance, contact Dewalt customer support.