Dewalt DW718 Miter Saw Manual

The Dewalt DW718 is a powerful 12-inch dual bevel sliding compound miter saw designed for professional carpenters and woodworkers. It features a robust motor, precise cutting capabilities, and a variety of settings for different angles and bevels. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Miter Saw 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 12-inch blade, dual bevel capability, sliding feature, laser guide, and adjustable miter settings.

Feature	Description
12-inch Blade	For cutting a variety of materials with precision.
Dual Bevel	Allows for bevel cuts in both directions.
Sliding Feature	Increases cutting capacity for wider materials.
Laser Guide	Helps ensure accurate cuts.
Adjustable Miter Settings	For precise angle cuts.

Installation

Unpack and inspect contents. Place on a stable work surface.

Attach the saw to a workbench or stand for stability.
Ensure the power cord is properly connected to a power source.
Adjust the miter and bevel settings as needed.

WARNING! Ensure the saw is securely mounted to avoid accidents.

First-Time Setup

Power on the saw; follow the setup instructions.

Adjust the blade height for the material being cut.
Set the miter angle using the adjustment knob.
Test the laser guide alignment before cutting.

CAUTION! Always wear safety gear when operating the saw.

Specifications

Blade Size: 12 inches.
Motor Power: 15 amps.
Bevel Capacity: Dual bevel up to 48 degrees.
Miter Capacity: 0 to 60 degrees.
Weight: Approximately 56 lbs.
Laser Guide: Integrated laser for precision cutting.
Power Source: 120V AC.

Controls and Settings

Access the miter and bevel settings via the adjustment knobs. The front panel includes the power switch and height adjustment lever.

Safety Features: Blade guard, electric brake, and safety switch to prevent accidental starts.

Connecting Devices

Ensure the saw is unplugged before making any connections.

Connect to a power source using the provided power cord.
Use appropriate extension cords if necessary, ensuring they are rated for the saw's power requirements.

Tip: Always check the power source before connecting the saw.

Operating the Miter Saw

Follow these steps for safe operation:

Adjust the miter and bevel settings as required.
Place the material securely against the fence.
Power on the saw and make the cut.
Always wait for the blade to stop before removing the material.

WARNING! Keep hands away from the blade during operation.

Safety Features

The Dewalt DW718 includes several safety features to protect the user:

Blade guard to prevent accidental contact.
Electric brake to stop the blade quickly.
Safety switch to prevent unintentional activation.

Care & Cleaning

Unplug the saw before cleaning. Use a dry cloth to wipe down the exterior; avoid using liquids.

CAUTION! Do not spray any cleaning solutions on the saw.

Regulatory Information

This product complies with all applicable safety standards and regulations. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Blade won't spin	Power issue	Check power connection and switch.
Inaccurate cuts	Misalignment	Check and adjust miter and bevel settings.
Excessive vibration	Loose components	Tighten all screws and bolts.
Laser not working	Battery issue	Replace the battery for the laser guide.

Reset: Refer to the manual for reset instructions if available.

Service: For service inquiries, contact Dewalt customer support.