Dewalt DW718-QS Manual

The Dewalt DW718-QS is a powerful and versatile miter saw designed for precision cutting in various materials. It features a 12-inch blade, dual bevel capabilities, and an adjustable miter system, making it ideal for both professional and DIY projects. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Miter Saw 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 12-inch carbide blade, dual bevel adjustment, laser guide, and dust collection system.

Feature	Description
12-inch Blade	For precise and clean cuts in various materials.
Dual Bevel	Allows for angled cuts in both directions.
Laser Guide	Helps in aligning cuts accurately.
Dust Collection	Minimizes mess and keeps the workspace clean.
Adjustable Miter	For making precise angled cuts.

Installation

Unpack and inspect contents. Place on a stable work surface.

Secure the miter saw to a workbench using clamps.
Connect the dust collection system if available.
Ensure all safety guards are in place before use.

WARNING! Ensure the saw is stable and secure to avoid accidents.

First-Time Setup

Power on the saw and follow the setup instructions.

Adjust the blade height for the material being cut.
Set the miter angle using the adjustable miter gauge.
Test the laser guide alignment before making cuts.

CAUTION! Always wear safety gear when operating the saw.

Specifications

Blade Size: 12 inches.
Bevel Capacity: Dual bevel up to 48 degrees.
Miter Capacity: 0 to 60 degrees.
Motor: 15 Amp motor for high performance.
Weight: Approximately 50 lbs.
Dust Port: 2-1/2 inches for efficient dust collection.
Power Source: 120V AC.

Controls and Settings

Access the miter and bevel adjustments using the control knobs located on the saw.

Safety Features: Blade guard, electric brake, and safety switch.

Connecting Devices

Ensure the saw is unplugged before making any connections.

Connect the dust collection system to the dust port.
Ensure all cables are secured and not in the way of the cutting area.

Tip: Always check connections before powering on the saw.

Operating the Miter Saw

Follow these steps for safe operation:

Adjust the miter angle and bevel settings as needed.
Place the material securely against the fence.
Power on the saw and make the cut.
Always wait for the blade to stop before removing the material.

WARNING! Keep hands away from the blade while cutting.

Safety Features

The Dewalt DW718-QS includes several safety features to protect the user, including a blade guard, electric brake, and a safety switch to prevent accidental starts.

Care & Cleaning

Unplug the saw before cleaning. Use a dry cloth to wipe down the exterior and ensure the blade is free of debris.

CAUTION! Do not use liquids or aerosols on the saw.

Regulatory Information

This product complies with all applicable safety standards and regulations. For support, visit www.dewalt.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Blade not spinning	Power issue	Check power connection and ensure the switch is on.
Inaccurate cuts	Misalignment	Check and adjust the miter and bevel settings.
Excessive dust	Poor dust collection	Ensure dust port is connected and clear of obstructions.
Overheating	Continuous use	Allow the saw to cool down before resuming work.

Reset: Refer to the manual for reset instructions if available.

Service: For service inquiries, contact Dewalt customer support.