Dewalt DW718-XE Manual

The Dewalt DW718-XE is a powerful 12-inch double bevel sliding compound miter saw designed for precision and versatility in cutting various materials. It features a robust motor, dual bevel capability, and an adjustable miter system, making it ideal for both professional contractors and DIY enthusiasts. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Saw 8. Safety Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 12-inch blade, dual bevel capability, adjustable miter angles, laser guide, and dust collection system.

Feature	Description
12-inch Blade	Provides a wide cutting capacity for various materials.
Dual Bevel Capability	Allows for bevel cuts in both directions without repositioning the workpiece.
Adjustable Miter Angles	Easy adjustments for precise miter cuts.
Laser Guide	Helps ensure accurate cuts by projecting a line on the workpiece.
Dust Collection System	Minimizes debris and keeps the workspace clean.

Installation

Unpack and inspect the saw. Place it on a stable work surface.

Attach the saw to a workbench using the provided mounting brackets.
Connect the dust collection system to a vacuum for optimal performance.
Ensure the power cord is plugged into a grounded outlet.

WARNING! Ensure the saw is securely mounted to prevent accidents during operation.

First-Time Setup

Power on the saw; follow the setup instructions in the manual.

Adjust the blade height and angle according to your cutting needs.
Calibrate the laser guide for accurate alignment.
Test the saw with scrap material to ensure proper operation.

CAUTION! Always wear safety gear when operating the saw.

Specifications

Blade Size: 12 inches.
Motor Power: 15 amps.
Bevel Capacity: 0-48 degrees left and right.
Miter Capacity: 0-60 degrees left and 0-50 degrees right.
Weight: 56 lbs.
Dust Port Size: 2-1/2 inches.
Laser Guide: Integrated laser for precision cutting.

Controls and Settings

Access the miter and bevel adjustments using the knobs located on the front of the saw. The laser guide can be activated via a switch on the side panel.

Safety Features: Blade guard, electric brake, and safety switch to prevent accidental starts.

Connecting Devices

Ensure the saw is unplugged before making any connections.

Connect the dust collection system to the dust port.
Ensure all power cords are securely connected to a grounded outlet.

Tip: Use a surge protector to safeguard against power surges.

Operating the Saw

Follow these steps for safe operation:

Adjust the blade height and angle as needed.
Secure the workpiece against the fence.
Power on the saw and make the cut.
Turn off the saw and wait for the blade to stop before removing the workpiece.

WARNING! Keep hands away from the blade during operation.

Safety Features

The Dewalt DW718-XE includes several safety features such as a blade guard, electric brake, and a safety switch to prevent accidental starts.

Care & Maintenance

Unplug the saw before performing any maintenance. Regularly clean the saw and check for any loose screws or parts.

CAUTION! Do not use liquids for cleaning; use a dry cloth only.

Regulatory Information

This product complies with all applicable safety standards and regulations. For more information, visit the Dewalt website or contact customer support.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Saw does not start	Power connection issue	Check power cord and outlet.
Blade not cutting	Dull blade	Replace or sharpen the blade.
Excessive vibration	Loose parts	Check and tighten all screws and bolts.
Laser guide not working	Battery issue	Replace the battery in the laser guide.

Service: For assistance, contact Dewalt customer support.